Transceiver Wireless 2.4GHz NRF24L01 Arduino / PIC /AVR / ARM

Specificatii:

• MuitiCwiver hardware provides the function of six receivers

• Link layer within makes the software design more simple

• 2Mbit/s makes it possible for the high quality VoIP

• 2Mbit/s 1Mbit/s 250Kbit/s three optional transmission rate

• Few peripheral components make it possible for low cost

• +/- 60 ppm crystals

• Need external inductance only in antenna matching place

• No need for multi layer PCB

• 5V level imput

• No need for external level translator

• Improved ShockBurst and UART are easy to connect with all kinds of low cost

• MCU MCU needs no external level

• 20 pin 4x4mm QFN lead-free package

• Peak current received at 2Mbit/s is 12.5mA

• Peak current of @0dBm output at

• 2Mbit/s is 11mA 2Mbit/s needs small average current

• Power consumption is 400mA in power down mode

• Power consumption is 32uA in idle mode

• Quick switch and wake-up time:130us

• Voltage regulator within

• Can work in low voltage between 1.9V to 3.6V

• Reduce noise to its best.

Pachetul contine:

 1 x Transceiver Wireless 2.4GHz NRF24L01 SPI