Driver motor pas cu pas o axa - CNC Router Single 1 Axis Controller Stepper Motor Drivers TB6560 3A compatibil Arduino

Product Parameters

1. Easy to use, no instructions, all of use are marked on the board 
2. With large heat sink to ensure good heat dissipation 
3. Input signal high-speed optocoupler isolation, guarantee not losing steps 
4. Semi-flow mode adjustable, semi-flow current adjustable, not the general design on the market, with a variety of semi-flow model and semi-flow current setting function 
5. Attenuation model adjusted for all the motors can be locked when no noise 
6. Ultra-small, the overall size: 62mm*75mm, installation of four mechanical positioning hole size: 65mm*55, hole size Φ3mm 

* Rated voltage: DC 12V-24V 
* Maximum current: 3A 
* Current adjustable (Current Settings): 0.3A, 0.5A, 0.8A, 1A, 1.1A, 1.2A 1.4A 1.5A, 1.6 1.9A, 2A 2.2A 2.6A, 3A 
* Subdivision adjustable (Excitation Mode): 1,2,8,16 

Attenuation adjustable (Decay Mode): 

0 %--- no decay mode 
25%--- of the slow decay mode 
50%--- of the normal mode 
100% - Fast Decay mode 
Decay mode of regulation by different motors to match impedance, thereby eliminating the noise when locked stepper motor and motor movement in the shake. 

Automatic half current setting (Torque Settings): 

0%---- No pulse when the current 20 to normal operating current of 20% 
50 %---- no pulse current 50% to normal operating current 
75 %---- no pulse current 75% to normal operating current 
100% --- no pulse when the current 100% to normal operating current