Cablaj modul Cruise Control AP900C Fiat Sedici Mazda 5 6 MX5 RX8 Opel Agila Suzuki Alto Grand Vitara Splash Toyota Land Cruiser - CMCC5320

Cablaj modul Cruise Control AP900C Fiat Sedici Mazda 5 6 MX5 RX8 Opel Agila Suzuki Alto Grand Vitara Splash Toyota Land Cruiser

Acest cablu se foloseste cu modulul Cruise Control AP900C 

Se foloseste pentru a seta si mentine o viteza dorita facand condusul pe distante lungi mai confortabil.

Se pot seta doua viteze diferite in memoria modulului, ce pot fi activate la apasarea unui buton.

Acest modul este activ pana cand coducatorul masinii anuleaza aceasta functie.

Beneficiile folosiri unui astfel de modul ar fi : consumul de combustibil redus, un condus mai confortabil.

Acest modul se poate monta pe masinile cu pedala de acceleratie controlata electronic (cu transmisie manuala sau automata), si este compatibil doar cu modelele de masini cu Can-Bus.

Producator	Model	Conexiune	sw vers.	Nota	SVT files	Tip conexiune	Remarca
Fiat	Sedici	CAN-bus	F17.04T		SVT 006	OBD-II / Diagnostic Link Connector   Pin 6 (CAN High) & Pin 14 (CAN Low)	Mount purlple wire to Original Clutch Switch
Fiat	Sedici	analogue
Hino	Dutro (1-1,5 tonner)	analogue
Lexus	CS-350	CAN-bus	F17.05B		can-scan	ODB-II / Diagnostic Link Connector   Pin 6 (CAN High) & Pin 14 (CAN Low)
Lexus	IS  <2011	analogue
Mazda	5 CiTD 2005-2010	analogue
Mazda	6 <2007	analogue
Mazda	MX5 2006>	analogue
Mazda	RX8	analogue
Mitsubishi	Arttrage 2013-	CAN-bus	F18.07K		SVT 122	ODB-II / Diagnostic Link Connector   Pin 6 (CAN High) & Pin 14 (CAN Low)
Mitsubishi	Grunder	CAN-bus	F17.04T		can-scan	ODB-II / Diagnostic Link Connector   Pin 6 (CAN High) & Pin 14 (CAN Low)
Mitsubishi	Mirage 2013-	CAN-bus	F18.07K		SVT 122	ODB-II / Diagnostic Link Connector   Pin 6 (CAN High) & Pin 14 (CAN Low)
Mitsubishi	Space Star 2013>	analogue
Mitsubishi	Space Star 2013>-	CAN-bus	F18.07K		SVT 123	ODB-II / Diagnostic Link Connector   Pin 6 (CAN High) & Pin 14 (CAN Low)
Nissan	Pixo	CAN-bus	F17.05C		can-scan	ODB-II / Diagnostic Link Connector  Pin 6 (CAN High) & Pin 14 (CAN Low)	Mount purlple wire to Original Clutch Switch
Nissan	Pixo	analogue
Opel	Agila 2008>	CAN-bus	F17.06D		can-scan	ODB-II / Diagnostic Link Connector  Pin 6 (CAN High) & Pin 14 (CAN Low)	Mount purlple wire to Original Clutch Switch
Opel	Agila 2008>	analogue					Speed pulse. Manual gearbox: brown wire Power Steering module (blue) connector (behind mid-console, right side). Automatic gearbox: TCM 26-pole connector, pin 25 pulple wire (A-style passenger side)
Suzuki	Alto 1.0 Automatic	analogue
Suzuki	Alto 1.0 Automatic 2009>	CAN-bus	F17.04T		SVT 006	ODB-II / Diagnostic Link Connector   Pin 6 (CAN High) & Pin 14 (CAN Low)	Mount AA170 or AA177 Clutch Switch
Suzuki	Alto 2009>	analogue
Suzuki	Grand Vitara 2006>	CAN-bus	F17.09G		SVT 058	ODB-II / Diagnostic Link Connector   Pin 6 (CAN High) & Pin 14 (CAN Low)	Mount AA170 or AA177 Clutch Switch
Suzuki	Grand Vitara 2006>	analogue					for speed pulse input use brown wire from the power steering module (blue) connector (behind mid-console,  right side)
Suzuki	Kizashi	CAN-bus	F17.10H		SVT 063	ODB-II / Diagnostic Link Connector  Pin 6 (CAN High) & Pin 14 (CAN Low)
Suzuki	Splash	CAN-bus	F17.06D		can-scan	ODB-II / Diagnostic Link Connector  Pin 6 (CAN High) & Pin 14 (CAN Low)	Mount purlple wire to Original Clutch Switch
Suzuki	Splash	analogue					for speed pulse input use brown wire from the power steering module (blue) connector (behind mid-console,  right side)
Suzuki	Swift 2008-2010	CAN-bus	F17.04T		SVT 007	ODB-II / Diagnostic Link Connector  Pin 6 (CAN High) & Pin 14 (CAN Low)
Suzuki	Swift 2010- manual + automatic gearbox	CAN-bus	F18.01J		SVT 110	ODB-II / Diagnostic Link Connector  Pin 6 (CAN High) & Pin 14 (CAN Low)	Mount purlple wire to Original Clutch Switch. SX4 Automatic: connect main ground wire, disconnect green wire in T-harness. Else failure code in Motor management.
Suzuki	Swift Diesel 2008>	analogue					for speed pulse input use brown wire from the power steering module (blue) connector (behind mid-console,  right side)
Suzuki	Swift Petrol 2005-2008	analogue
Suzuki	Swift Petrol 2008>	analogue					for speed pulse input use brown wire from the power steering module (blue) connector (behind mid-console,  right side)
Suzuki	SX4 / Liana 2006>	CAN-bus	F17.04T		SVT 007	ODB-II / Diagnostic Link Connector  Pin 6 (CAN High) & Pin 14 (CAN Low)
Suzuki	SX4 1.6	analogue
Toyota	Dyna 100, 150, 200, 250 (Y-200 series)	analogue
Toyota	Hi-lux 2005>	analogue
Toyota	Land Cruiser 100 2005>	analogue
Toyota	Land Cruiser 120 2003>	analogue
Toyota	Land Cruiser 150 Prado 2005-2009	analogue
Toyota	Prius 2005-2010	analogue
Toyota	Raider	analogue
Toyota	Sienna 2003-2010	analogue
Toyota	Tacoma automatic 2005>	CAN-bus	F18.09M		SVT 148	ODB-II / Diagnostic Link Connector   Pin 6 (CAN High) & Pin 14 (CAN Low)
Toyota	Tundra 2007-2013	CAN-bus	F18.09M		SVT 148	ODB-II / Diagnostic Link Connector   Pin 6 (CAN High) & Pin 14 (CAN Low)