Mixer Gemini FX 7000

Mixer Gemini FX 7000 pe 5 canale, vumetre, crossover, DSP effect, reglaje pe fiecare canal, gain, inalte bass/medii/inalte, intrare de microfon si casti, argintiu, cueing, mufe aurite, iesiri balansate. Functioneaza fara probleme, este foarte ingrijit. 

AC 15V: Use this input to connect the power, plug the adapter into an outlet and the AC 15V (1) input.

POWER: To turn on the POWER (2), press this switch once.

BALANCED OUTPUT: Use the BALANCED OUTPUT (3) to connect to your amplifiers BALANCED input.

MASTER OUTPUT: An unbalanced output to connect to your amplifiers input.

ZONE OUTPUT: Connect this line to an additional amplifier or powered speakers.

REC OUTPUT: To record a mix, connect this line to a recording device.

SEND: An output used to send your mix to an outboard signal processor.

RETURN: An input that receives a signal from your outboard signal processor.

LINE 5 INPUT: To connect any line in devices, such as a CD Player, DAT, MiniDisc, etc.

PH3/L4 INPUT (PHONO3/LINE4): To connect a TURNTABLE or LINE input into the mixer.

LINE 3 INPUT: SEE LINE 9

PH2/L2 INPUT (PHONO2/LINE2): SEE LINE 10

PH1/L1 INPUT (PHONO1/LINE1): SEE LINE 10

MIC 2: Plug in your second MICROPHONE here.

PHONO/LINE SWITCH: Controls what kind of device is heard on the PH3/L4 (10) input.

PHONO/LINE SWITCH: Controls what kind of device is heard on the PH2/L2 (12) input.

PHONO/LINE SWITCH: Controls what kind of device is heard on the PH1/L1 (13) input.

GROUND SCREW: Connect your ground wire from your turntable here.

MIC 1: Plug in the main MICROPHONE here.

HEADPHONES: Plug in your HEADPHONES in here, to listen to your mix.

CROSSFADER CURVE: Pressing this button changes the CROSSFADER (23) curve from gradual to sharp.

X-FADER ASSIGN: Use to select CHANNEL 1 or 2, for which channel is assigned to the left side of the CROSSFADER (23).

CROSSFADER: Shifting the CROSSFADER (23) from left to right will enable you to mix different channels.

CROSSFADER REVERSE SWITCH: This reverses the location of the channels assigned to the CROSSFADER (23).

DSP EFFECT: Press DSP EFFECT (25) to turn the effect on or off that is being chosen.

CHANNEL 1 SLIDE: Moving this slide up or down raises and lowers the volume for CHANNEL 1.

CHANNEL 2 SLIDE: Moving this slide up or down raises and lowers the volume for CHANNEL 2.

CHANNEL 3 SLIDE: Moving this slide up or down raises and lowers the volume for CHANNEL 3.

CUE CH1: Press CUE CH1 (29) to hear CHANNEL 1 thru the HEADPHONES.

CUE CH2: Press CUE CH2 (30) to hear CHANNEL 2 thru the HEADPHONES.

CUE CH3: Press CUE CH3 (31) to hear CHANNEL 3 thru the HEADPHONES.

CUE EFF: Press CUE EFF (32) to hear the effect that is being applied to CHANNELS 1-3, MIC 1 or the MASTER (PGM)

with the HEADPHONES.

CH-1 SWITCH: Flipping this switch changes the CHANNEL 1 input from MIC 2 to PH1/L1.

CH-2 SWITCH: Flipping this switch changes the CHANNEL 2 input from PH2/L2 to L3.

CH-3 SWITCH: Flipping this switch changes the CHANNEL 3 input from PH3/L4 to L5.

LOW: Controls the LOW (Bass) range for the channels.

MID: Controls the MID (Middle) range for the channels.

HIGH: Controls the HIGH (Treble) range for the channels.

GAIN: Controls the overall volume GAIN for each of the channels.

VU METER: The VU METER (40) displays the LEFT & RIGHT CHANNEL levels or the CUE and PGM.

VU METER MODE: Press VU METER MODE (41) button to change the VU METER (40) mode.

CUE SPLIT: Pressing CUE SPLIT (42) lets you hear the CUE on the left side earphone and the PGM on the right side.

CUE-PGM: Turning CUE-PGM (43), from left to right changes the monitored CUE to PGM (MASTER).

CUE LEVEL: CUE LEVEL (44) controls the level of the CUE.

MASTER: MASTER (45) controls the level of the MASTER OUTPUT (4) & BALANCED OUTPUT (3).

ZONE: ZONE (46) controls the level of the ZONE OUTPUT (5).

MIC 1/TALKOVER: MIC 1/TALKOVER (47) switch activates MIC 1 (19) and TALKOVER.

MIC 1/TALKOVER LED: The MIC 1/TALKOVER LED (48) glows when the MIC 1/TALKOVER (47) switch is on.

MIC1 LEVEL: MIC 1 LEVEL (49) controls the volume of MIC 1 (19).

LOW: For adjusting the BASS level on MIC 1 (19).

HIGH: For adjusting the TREBLE level on MIC 1 (19).

CHANNEL SELECTOR: Moving the CHANNEL SELECTOR (52) will assign CHANNELS 1-3, MIC 1 or the MASTER

(PGM) that the DSP SIGNAL PROCESSOR is affecting. Use CUE EFF (32) to hear the effect before pressing.

EFFECT SELECTOR: Turn this knob to select 1-16 effects.

DSP EFFECTS: Here is the list of effects, refer to DSP SIGNAL PROCESSOR section for details.

PARAMETER LED DISPLAY: PARAMETER LED DISPLAY (55) displays the chosen effect and the parameters.

PARAMETER KNOB: PARAMETER (56) knob changes the parameters (1-99) of the chosen effect.

WET/DRY: Turning the WET/DRY (57) knob lets you activate the effects signal in and out of the mix.