Receiver Nakamichi SR-2E STASIS
-
Produs:Second Hand, Fără garanție
-
Numar articol:137713444
-
Disponibilitate:Indisponibil
-
Preț:400,00 Lei
-
Anuntul a expirat la:20.03.2016, 11:19
-
Ai o nelamurire?
-
Vandut de:
-
Vinde si tu:Pune in vanzare un produs ca acesta
-
Optiuni:
Descriere
Vânzatorul este direct răspunzator pentru produsul afișat în această pagină.
Disponibilitate: Indisponibil - Vezi produse similare
Specificatii
Receiver
Nakamichi SR-2E STASIS
Stare foarte buna functional.
Optic, afisajul frecventei se ilumineaza neuniform.
Pentru alte componente audio Nakamichi vezi celelate licitatii ale mele
Review:
Nakamichi SR-2 stereo receiver
The Audiophile receiver
:
The Nakamichi SR-2 belongs to the
SR and TA models that redefined the word receiver. It offers the
same convenience and economy, but each stage is designed like
audiophile components - each individually optimized, each
individually powered, each isolated for minimum interference. And
what a receiver : STASIS power amplification for uniform impedance,
inherent stability and tremendous current capability, a moving
magnet phono preamp with precise equalization, tone defeat and more
: like defeatable conventional tone controls, a 10 preset PLL
quartz-lock FM / AM tuner with manual and auto seek
tuning
Multi-stage Power Supply
:
The SR-2's exceptional performance
is due in part to its power supply. Unlike ordinary receivers, the
SR-2's transformer has separate windings, and rectifiers for each
major section : power amplifier, preamplifier, tuner and display.
The tuner is even buffered from other inputs to prevent
interference. This unusually exotic power supply permits each
section to operate independently of the others - the major
advantage of separate components
STASIS amplification
:
Audiophiles who hear the SR-2 are
amazed at its effortlessly transparent sound. Music has more
detail, more impact, more realism - especially played through
difficult high-end speakers. The reason is Nakamichi's STASIS
amplifiers - a radically different and superior design in which two
amplifiers drive the speakers : a high quality low power and a
current mirror bootstrap to supply the muscle. The low-power
amplifier has lower output impedance than the bootstrap and so
establishes the output voltage. Thus it determines the sound
quality, but supplies only enough power to correct distortion in
the current amplifier. Since a low power amplifier can be designed
for virtually perfect performance, global feedback isn't needed as
in ordinary amplifiers.
Removing overall feedback ensures
uniform output impedance and inherent stability, and, since the
amplifier is stable, there is no need to isolate it from the
speaker with a coil as is the usual method. This permits the
amplifier to control the speaker more precisely and realize its
full potential. The current bootstrap can provide tremendous peak
current reserves up to 25 amps for low impedance loads (25 A >
SR-4 , 18A > SR-3, 14A > SR-2)
An Audiophile preamp
:
Special care was lavished on the
phono preamp. The input circuit is a direct coupled discrete design
using ultra high gm FETs in a balanced differential configuration.
These drive a differential gain stage with RIAA equalization
obtained via a direct-coupled precision feedback network. The
preamp accommodates MM cartridges only. Thanks to a simulated
inductor [gyrator] design, it has maximum rejection in the warp
region, minimum loss in bass response and is free of noise
pickup
Copper-styrene capacitors and metal
film resistors are used in the signal path ensure minimum noise and
distortion
An exceptional tuner
:
The SR-2's Quartz-PLL-synthesized
FM tuner is far from ordinary. Of course the quartz-locked design
ensures accurate tuning and eliminates drift, but typical tuners of
this type have high residual noise due to reference-frequency
jitter. The SR-2 tuner uses a reference frequency twice that of
ordinary tuners to improve signal to noise S/N ratio. A dual gate
MOSFET front end with high-Q twin varicap diodes provides
selectivity equivalent to a four-gang capacitor while a special
auto-seek circuit that detects both signal and noise level prevents
false stops between or near strong stations
Specifications
:
- Power : 30W RMS at rated
THD distortion 0.1%
- Dynamic power : 45W at
8ohms, 55W at 4ohms
- Peak output current : 14A
per channel
- Frequency response : 20Hz -
22kHz [+0dB / -0.5dB], 5Hz to 75KHz [+0dB /
-3dB]
- Signal to noise : >
105dB at rated power, Phono signal / noise : 74dB
A-weighted
- tuner FM : mono 14.7dBf
[3uV] for 50dB quieting, stereo 37.5dBf
[41.1uV]
- Headphone output :
70mW
- Dimensions [ W x D x H ]:
430 x 370 x 100mm
- Weight :
7.5kg
Sursa: nrpavs.co.nz/NakamichiSR-2.htm
Trimit in tara cu Posta Romana sau Curier Rapid in anumite conditii . Costurile expedierii sunt suportate de cumparator.
Modalitati de livrare si plata
LIVRARE
In Timisoara
-
- Predare personala in max. 5 zile lucratoare
PLATA
- - La predare
- - Ramburs
Politica de retur
- - Produsul nu se poate returna.