Avem peste 6.000.000 de produse de la magazine si vanzatori profesionisti in Okazii.ro Marketplace
Cos cumparaturi
Favorite

Detector de metale METAL-TEC

Descriere

Vânzatorul este direct răspunzator pentru produsul afișat în această pagină.

Disponibilitate: Indisponibil - Vezi produse similare

Specificatii

Metal-Tec 1400 (Metal detector / Hand scanner)

 

The Metal-Tec 1400 has been designed to be used in conjunction with a hand search to assist in locating, with great accuracy, metal objects which otherwise may have been overlooked. The Metal-Tec requires only one hand for operation and can easily be held between the index finger and the thumb of one hand, freeing up the other fingers for use during a search or the frisking of a suspect.

There is no adjustment necessary, and the sensitivity is factory calibrated and automatically compensates for temperature changes. Metal-Tec was specifically designed to be used in close contact with the suspect during a search. The Metal-Tec can detect and pinpoint metal objects without the need for a constant sweeping motion. Once a metal object is detected, the operator can easily determine the objects possible threat level based on the distance the object is detected, this is referred to as density discrimination. The operator can also determine the metal objects size and shape by observing the vibration pattern, this is referred to as the vibration signature feature.

The Metal-Tec is equipped with an omni directional sensor which can detect metal in all directions. When searching a suspect, it may not always be practical or safe to remove your eyes from the subject to locate the power On/Off switch. It is for this reason the Metal-Tec does not have a visual mark to indicate where the On/Off Button is located.

To activate the Metal-Tec, hold the Metal-Tec by its vinyl grip handle, and point the narrow probe end away from you. According to how you are holding the Metal-Tec, the On/Off Button may be located either on the top or the bottom under the non-slip vinyl grip, approximately in the center of the unit.

It is not recommended that the operator ever look away from the suspect when turning on and testing the Metal-Tec, it is for this reason we have incorporated a built in tester in the holster. By simply reaching down and pressing the on/off power button while the Metal-Tec is still in the holster, the metal snap at the base of the holster will cause the Metal-Tec to vibrate indicating it is now powered on.

Now remove the Metal-Tec from it's holster, if it is functioning properly, it will stop vibrating indicating the battery is good and it is functioning properly. However, if unit continues to vibrate with no metal within range, this would indicate that the battery voltage is low and it is time to change the battery.

Another safety feature to verify that the METAL-TEC was on during the search, and that the operator did not inadvertently turn it off before completing the search. When you return the Metal-Tec to its holster it should vibrate, showing that the unit was on during the search

Specifications:

  • Most compact silent metal/weapon detection
  • Omni directional sensor which can detect metal in all directions.
  • Detection indicator by silent vibration
  • Tactical advantage by not alarming the subject when metal is detected
  • Is easy to operate and has only one operational control
  • One hand operation
  • Density Discrimination - which will help you determine the mass of metal detected
  • Vibration Signature - which will help you determine the size and shape detected metal
  • Probe End (small end which is pointed toward subject to pin point object and determine approximate size / shape)
  • Power switch
  • Non-slip vinyl grip handle
  • Can assist in up to 2,000 searches based on an average 15-20 second search
  • Operates in a 9V alkaline battry
  • Low battery indicator, causes the unit to constantly vibrate notifying the user to replace the battery
  • High impact ABS plastic housing which has a tensile strength of 6,800 p.s.i.
  • Can be exposed to all weather conditions
  • Impact proof
  • Water resistant to 35 feet
  • (non polarity sensitive) making battery replacement in the field quick and uncomplicated
  • Includes a heavy duty nylon holster which includes an upper Velcro7 strap for easy deployment.
  • The holster also incorporates a
  • Metal snap at the base which allows for easy removal of the holster from the duty belt.
  • The metal snap also serves as a built in tester prior to deployment and upon returning the Metal-Tec to its holster
  • Included is a vehicle mounting kit, allowing the Metal-Tec holster to be Velcro7 mounted in the patrol vehicle for easy access and convenience.
  • Dimensions: L = 7.9” (20.0 cm) W = 1.75” (4.5 cm) H =1.30” (3.3 cm)
  • Weight: 8.8 ounces (249.4 grams)
  • Sensitivity control: Factory set
  • Indicators: Silent Vibration
  • Controls: Single control (Power On / Off)
  • Battery: Standard 9 Volt Alkaline
  • Operating Temperatures: - 15 F ( - 26 C) to + 130 F ( + 54 C)
  • Humidity: 98% Non condensing
  • Material: High Impact ABS Plastic
  • Case tensile strength: 6,800 PSI ASTM ( D 638)
  • Operating Frequency: 360 kHz
  • Water Resistance: 35 feet (for 1 hour)
  • Easy to clean
  • CE Certified
  • EN 50082-1:1997 harmonized
  • EN 50081-2:1993 harmonized
  • OSHA CFR-1910.97a2i
  • IEEE C95.1 – 1992
  • WEEE
  • U.S . Made
  • U.S. Design Patent

Produsul vine insotit de husa de purtare, nu vine in ambalaajul/cutia original.

Nu a fost folosit, am bifat aproape nou pentru ca nu vine ambalat in cutia originala.

Modalitati de livrare si plata

LIVRARE

In Targu Mures

  • - Predare personala - Tudor in max. 3 zile lucratoare

PLATA

  • - La predare
  • - Ramburs

Politica de retur

  • - Produsul nu se poate returna.
Fii primul care scrie un review

Spune-ti parerea acordand o nota produsului

Adauga review