Switch Cisco Catalyst 3560 PoE 48x 10/100 + 4x 1000 SFP, WS-C3560-48PS-S
-
Produs:Aproape Nou, Fără garanție
-
Numar articol:160410359
-
Disponibilitate:Indisponibil
-
Preț:700,00 Lei
-
Anuntul a expirat la:16.05.2015, 22:21
-
Ai o nelamurire?
-
Vandut de:
-
Vinde si tu:Pune in vanzare un produs ca acesta
-
Optiuni:
Descriere
Vânzatorul este direct răspunzator pentru produsul afișat în această pagină.
Disponibilitate: Indisponibil - Vezi produse similare
Specificatii
Switch Cisco Catalyst 3560 PoE 48x 10/100 + 4x 1000 SFP, WS-C3560-48PS-S
Model
Brand
CISCO
Series
CATALYST 3560
Model
WS-C3560-48PS-S
Spec
StandardsIEEE 802.1s
IEEE 802.1w
IEEE 802.1x
IEEE 802.3ad
IEEE 802.3af
IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T
ports
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1p CoS Prioritization
IEEE 802.1Q VLAN
IEEE 802.3 10BASE-T specification
IEEE 802.3u 100BASE-TX specification
IEEE 802.3ab 1000BASE-T specification
IEEE 802.3z 1000BASE-X specification
1000BASE-X (SFP)
1000BASE-SX
1000BASE-LX/LH
1000BASE-ZX
1000BASE-CWDM SFP 1470 nm
1000BASE-CWDM SFP 1490 nm
1000BASE-CWDM SFP 1510 nm
1000BASE-CWDM SFP 1530 nm
1000BASE-CWDM SFP 1550 nm
1000BASE-CWDM SFP 1570 nm
1000BASE-CWDM SFP 1590 nm
1000BASE-CWDM SFP 1610 nm
RMON I and II standards
SNMPv1, SNMPv2c, and SNMPv3Jumbo FramesUp to 1546 bytesPrimary
Ports48 Ethernet 10/100 ports with PoE and 4 SFP-based Gigabit
Ethernet portsPrimary Port Speed10/100Mbps + 1000MbpsMAC Address
TableUp to 12,000Buffer Memory128 MB DRAM
16-MB Flash memorySecurityIEEE 802.1x allows dynamic, port-based
security, providing user authentication.
IEEE 802.1x with VLAN assignment allows a dynamic VLAN assignment
for a specific user regardless of where the user is connected.
IEEE 802.1x with voice VLAN permits an IP phone to access the voice
VLAN irrespective of the authorized or unauthorized state of the
port.
IEEE 802.1x and port security are provided to authenticate the port
and manage network access for all MAC addresses, including those of
the client.
IEEE 802.1x with an ACL assignment allows for specific
identity-based security policies regardless of where the user is
connected.
IEEE 802.1x with Guest VLAN allows guests without 802.1x clients to
have limited network access on the guest VLAN.
CISCO security VLAN ACLs (VACLs) on all VLANs prevent unauthorized
data flows from being bridged within VLANs.
CISCO standard and extended IP security router ACLs (RACLs) define
security policies on routed interfaces for control- and data-plane
traffic.
Port-based ACLs (PACLs) for Layer 2 interfaces allow application of
security policies on individual switch ports.
Unicast MAC filtering prevents the forwarding of any type of packet
with a matching MAC address.
Unknown unicast and multicast port blocking allows tight control by
filtering packets that the switch has not already learned how to
forward.
SSHv2, Kerberos, and SNMPv3 provide network security by encrypting
administrator traffic during Telnet and SNMP sessions. SSHv2,
Kerberos, and the cryptographic version of SNMPv3 require a special
cryptographic software image because of U.S. export
restrictions.
Private VLAN provides security and isolation between switch ports,
helping ensure that users cannot snoop on other users' traffic.
Bidirectional data support on the Switched Port Analyzer (SPAN)
port allows the CISCO Secure Intrusion Detection System (IDS) to
take action when an intruder is detected.Cabling10BASE-T ports:
RJ-45 connectors, two-pair Category 3, 4, or 5 unshielded
twisted-pair (UTP) cabling
10BASE-T PoE ports: RJ-45 connectors, two-pair Category 3, 4, or 5
UTP cabling power pins 1,2 (negative) and 3,6 (positive)
100BASE-TX ports: RJ-45 connectors, two-pair Category 5 UTP
cabling
100BASE-TX PoE ports: RJ-45 connectors, two-pair Category 5 UTP
cabling, power on pins 1,2 (negative) and 3,6 (positive)
1000BASE-T ports: RJ-45 connectors, four-pair Category 5 UTP
cabling
1000BASE-T SFP-based ports: RJ-45 connectors, four-pair Category 5
UTP cabling
1000BASE-SX, -LX/LH, -ZX, and CWDM SFP-based ports: LC fiber
connectors (single/multimode fiber)
CISCO Catalyst 3560 SFP Interconnect Cable: two-pair shielded
cabling, 50 cm
Management console port: RJ-45-to-DB-9 cable for PC connections;
for terminal connections, use RJ-45- to-DB-25 female
data-terminal-equipment (DTE) adaptor (can be ordered separately
from CISCO; part number ACS-DSBUASYN=)LEDsPer-port status LEDs:
Link integrity, disabled, activity, speed, full-duplex indications,
PoE applied, PoE error, and PoE disabled indications
System-status LEDs: System, RPS, link status, link duplex, link
speed, and PoE indicationsVLAN SupportYesPower100–240 VAC
(autoranging), 5.5–2.8A, 50–60 HzDimensions17.5" x 14.9" x
1.7"Weight13.2 lbs.Temperature0ºC to 45ºC (32ºF to 113ºF)Humidity10
to 85% (noncondensing)
Features
Features1RU fixed-configuration, multilayer switch
Enterprise-class intelligent services delivered to the network
edge
IEEE 802.3af and CISCO prestandard Power over Ethernet
IP Base license (formerly SMI) installed
Basic RIP and static routing, upgradeable to full dynamic IP
routing
Advanced QoS
Granular Rate Limiting
Modalitati de livrare si plata
LIVRARE
In Bucuresti
-
- Predare personala in max. 2 zile lucratoare
PLATA
- - La predare
- - Ramburs
Politica de retur
- - Produsul nu se poate returna.