TRONIC SMV 9809 - Detector de metal si fire electrice

TRONIC SMV 9809 - Detector de metal si fire electrice

Ajutor in stabilirea locului potrivit pentru gauri in perete, poate indica cu o precizie destul de buna pe unde trec firele electrice sau tevile.

EXTRAS DINTR-UN REVIEW IN ENGLEZA:

Tronic 3 In 1 Detector

It detects for wood, metal and electric tension in the walls of your home.

The Tronic works on walls, floors and ceilings. It finds wood studs, wooden joists, metal studs, and electric wires in the wall. It works off a 9 volt battery (89p for one in Wilkinsons), has an LED on / off indicator, a battery low LED indicator, and an LED lights up and buzzer sounds when something is detected in the wall (shows different light for metal, voltage, and wood).

It eliminates guesswork, and saves unnecessary damage to home decorations by precisely locating wood or metal studs through dry walls, plywood and panelling. It also, as I’ve said, avoids the dangers of hitting concealed “hot” electrical wire (unshielded or shielded by plastic insulation) or gas pipes.

Technical Information

- Size: 19cm (L) x 7.2cm (W) x 3.3cm (H)
- Battery: One 9 Volt alkaline
- Audio: Loudness: > 70dB
- Temp: Operating: -7ºC to +49ºC
- Humidity: 80% RH (non-condensing)
- Studs and Wooden Batten Detection: up to 9mm
- Metal Detection: up to 25mm
- “Hot” Electrical Wire Detection: The presence of 220 to 250 Volts at 50 and 60 hertz AC will be detected in all modes for safety. The buzzer sound will beep louder and louder when the detector gets closer to a “hot” electrical wire (unshielded or shielded by a plastic pipe).

- The detector cannot detect water pipes and gas pipes shielded by metal materials, it will only show them as “Metal” only.

- It’s not suitable for use on objects insulated with foil.

- Sensing depth and edge detection can vary due to moisture content of materials, wall texture, paint etc..