3.5" TFT LCD HVGA 480 x 320 pixeli / Display Raspberry Pi 3 (d.5515H)
-
Produs:Nou, Fără garanție
-
Numar articol:218326152
-
Disponibilitate:Indisponibil
-
Preț:109,00 Lei
-
Anuntul a expirat la:18.04.2024, 20:34
-
Ai o nelamurire?
-
Vandut de:
-
Vinde si tu:Pune in vanzare un produs ca acesta
-
Optiuni:
Descriere
Vânzatorul este direct răspunzator pentru produsul afișat în această pagină.
Disponibilitate: Indisponibil - Vezi produse similare
Specificatii
Produsul este la fel cu cel prezentat in fotografii!
Specificații în limba
engleză:
This is the 3.5 inch touch screen for Raspberry Pi 4 .
There are 5 FPS and 50 FPS to choose according to your need.
The screen can install on the acrylic with Raspberry Pi ( need to remove the cover ).
When you don't use the 3.5 inch screen , you can install the cooling fan on the cover ( this link does not include fan ).
About the 3.5 inch touch screen
1. 5FPS type (bundle 1 and bundle
3 ):
(1). 320×480 resolution
(2). Resistive touch control
(3). Supports any revision of Raspberry Pi (directly-pluggable)
(4). Compatible with Raspberry Pi 4.
(5).Drivers provided (works with your own Raspbian/Ubuntu )
(6). Size perfectly fits the Raspberry Pi
(7). Supports Raspbian system, ubuntu system ,kali Linux system 2. 50FPS type ( bundle 2 and bundle
4 ) :
(1). Physical resolution 320 x 480, with resistive touch control
(2). It supports up to 125MHz SPI signal input, showing stable no screen and no flicker
(3). With the refresh rate of raspberry pie around 50Hz, play video to play the game without pressure
(4). Support FBCP software drive, support double screen display, can adjust the resolution of the software to zoom
(5). Same size as the Raspberry Pi, compatible for Raspberry Pi 4.
(6). Support Raspbian/Ubuntu/Kali system, provide driver and image.
How to use the screen :
Step
1:Download the Raspbian image Step
2: Burn the system image Step
3: Open terminal(SSH) and install the driver on RaspberryPi You can also download the system image by this link: #!Ojp2ACyI!dn4Gt5OibU2pzN9AvwzQXg4PSSYmh3mMxXnvgNVbgT0 Run: sudo rm -rf LCD-show git clone chmod -R 755 LCD-show cd LCD-show/ sudo ./LCD35-show Wait a few minutes, when the system reboot it will be ok.
Please use our recommended system for touch screen. If you use other systems, it may not have touch function or may not work.
You need to configure it yourself. Because there are many systems that the Raspberry Pi can use, we can’t make every system compatible with our touch screen.
- Designed for Raspberry Pi Model B/B+, an ideal alternative solution for HDMI monitor
- 320×480 resolution, better display
- Convenient Men-Machine interface for Raspberry Pi, combined with the portable power, DIY anywhere anytime
- Supports Raspbian system, enables your system to:
- Play videos (supports multi formats, MP4 and so on)
- Take photos by touching (up to 17 camera modes)
- Support software keyboard (system interaction without keyboard/mouse)
Key Parameters
LCD Type | TFT |
---|---|
LCD Interface | SPI |
Touch Screen Type | Resistive |
Touch Screen Controller | XPT2046 |
Colors | 65536 |
Backlight | LED |
Resolution | 320*480 (Pixel) |
Aspect Ratio | 2:3 |
Power Consumption | TBD |
Backlight Current | TBD |
Operating Temp. (Centigrade) | TBD |
Interface
PIN NO. | SYMBOL | DESCRIPTION |
---|---|---|
1, 17 | 3.3V | Power positive (3.3V power input) |
2, 4 | 5V | Power positive (5V power input) |
3, 5, 7, 8, 10, 12, 13, 15, 16 | NC | NC |
6, 9, 14, 20, 25 | GND | Ground |
11 | TP_IRQ | Touch Panel interrupt, low level while the Touch Panel detects touching |
18 | LCD_RS | Instruction/Data Register selection |
19 | LCD_SI / TP_SI | SPI data input of LCD/Touch Panel |
21 | TP_SO | SPI data output of Touch Panel |
22 | RST | Reset |
23 | LCD_SCK / TP_SCK | SPI clock of LCD/Touch Panel |
24 | LCD_CS | LCD chip selection, low active |
26 | TP_CS | Touch Panel chip selection, low active |
External Dimension
Pachetul conține:
• 1 bucată x display 3.5
inch Raspberry Pi 3 (cod produs:
d.5515H)
Se expediază în toată țara prin curierat rapid în
sistem ramburs.
• Urgent Cargus - 15,5 lei
• Poșta Romană (Prioripost) - 15,5 lei
Dacă aveți nelămuriri sau întrebări vă rog nu ezitați să sunați sau să-mi scrieți.
Modalitati de livrare si plata
LIVRARE
In Ostrov
-
- Prin curier cu Garantia de Livrare - 18 Lei in max. 2 zile lucratoare
In Romania:
-
- Prin curier cu Garantia de Livrare - 18 Lei in max. 2 zile lucratoare
- Ridicare de la locker Joi, 2 Mai. - 13,09 Lei
PLATA
- - Ramburs cu Garantia de Livrare
Curierul special îți livrează produsul pe care tu îl achiți la primire. Dacă produsul nu este ca în descriere, îți recuperezi banii, inclusiv taxele de transport.
- - Online
Politica de retur
- - Produsul se poate returna in maxim 3 zile lucratoare
- - Metoda de retur: Ramburs contravaloare produs
- - Costul transportului va fi suportat de catre cumparator
- - Alte detalii: Retur acceptat in conditiile Garantiei de Livrare