Amplificator Yamaha M-70 + Preamplificator Yamaha C-50

Statie amplificare Yamaha M70 + Preamplificator C-50

Specifications:

General:

System: Transistor Power Amplifier
Power consumption: 900 W 120/240 V

Power Amplifier
Speaker Outputs: 2 x 2 Speaker
Continuous power 8Ω: 200 + 200 Watts RMS

Frequency Response: DC-100,00 (+0 7/-0.5 dB/ 8Ω) HZ
Input Sensitivity: 1.000 mV
Input Impedance: 25 kΩ
Signal to Noise Ratio: 124 db A, short circuited
Harmonic Distortion: 0.0002 (8Ω) % at rated output
Dimensions:: 17.13 x 5.23 x 14.96 (w) x (h) x (d)

Weight is about 40lbs.

* ZDR = ZERO Distortion Rule Amplifier
* Power output is 200 'real RMS' watts per channel into 8 ohms  with SUPER LOW 0.002% THD.
* 200V/usec slew rate for SUPER FAST RESPONSE amplifier !
* LED bar graph display shows output power for each channel.
* Speaker connections for 2 pairs of speakers (A or B).
* Offers DC coupled circuitry this amp will deliver high power and quality sound.
* Input level controls on front.
* Built-in voltage selector.

Yamaha C-50. It has 2 phono inputs 2 outputs with a full array of loading for lp playback parametric eq subsonic and tone bypass and direct mode for the purest signal. Less used controls are covered by a cool drop down door.

Specifications  Yamaha C-50

Frequency response: 1Hz to 100kHz

Total harmonic distortion: 0.001%

Input sensitivity: 0.1mV (MC), 2.5mV (MM), 150mV (line)

Signal to noise ratio: 90dB (MC), 93dB (MM), 105dB (line)

Channel separation: 85dB (MM), 85dB (line)

Output: 150mV (line), 1.5V (Pre out), 10V (Pre out Max)

Dimensions: 435 x 96.5 x 369mm

Weight: 6.8kg

very fine condition black face very powerful amplifier. This amp was Yamaha's top of the line model. Amplifier has been taken care of and never missed a beat.

It includes dual range power level meters which work well. The glass cover on the led is in perfect shape. All channels were tested and are working 100%. . This also supports two sets of speakers with individual volume controls for each pair.

Another great feature is that this amplifier will run in Class-A mode unless the continuous power requirement exceeds 25 Watts per channel (10 W in the M-40) then it will autoswitch to class AB.

Dispun de o gama foarte larga de boxe, amplificatoare, subwoofere, sisteme 5.1, amplitunere, cd playere, deck-uri, amplificatoare auto si subwoofere auto, toate aduse din Germania .Verificati restul licitatiilor mele.Asiguram ambalare foarte buna.