Aparat de electroterapie masaj acupunctura cu impulsuri

Acupuncture Stimulator KWD 808 I

MULTI-PURPOSE ACUPUNCTURE STIMULATOR HEALTH DEVICE

GREAT WALL 808 SERIES

The KWD 808 I Acupuncture Stimulator is a professional level acupuncture appar­atus designed for detection of acupuncture points, massage (TENS), and for applying acupuncture (electro-needle therapy) and magneto-therapy.

Just like its sister model, the KWD-808 II, the KW080I features a built-in timer and can output 5 different kinds of waveforms, each indicated by a symbol which lights up when selected. However, unique features specific to only this model include 2 detection jacks, 6 outputs, and a design tailored chiefly for clinics and hospitals.

USES FOR THE KWD 808 I

• Provides electro-needle therapy
• Alternative to Hand Massage
• Enables needle-less acupuncture-pulse electric therapy
• Assists the detection of acupoints
• Multi-Purpose Health Device

FEATURES

• Adjustable frequency and intensity
• Adjustable sensitivity probe point Locator
• Five wave form selection buttons with illuminating wave form graphics
• 2 independent indicator lights for frequency and power
• Use with adaptor or 6 "C" batteries
• Operating output protection with error signal tone for incorrect use
• 6 outputs, plus 2 detection outputs
• Includes adhesive electrode pads and lead wires, acupoint detecting pen, and output wires.
• Built-in timer

THE 5 PULSEWAVE FORMS FOR THE KWD 808 I

This acupuncture stimulator features five kinds of wave forms, all very safe, with low frequencies equal to that of the human body. The following five wave forms may be used at the same time or separately, and the output of each one may be reg­ulated independently. For increased effect, two or more outputs can be used simultaneously.

 OVERVIEW OF INSTRUCTIONS -

Turning on the device

Connect the A/C adaptor to the A/C jack at the rear of the device, or, insert 6 "C" cell batteries into the battery compartment underneath the device. Ensure no waveform buttons are depressed, with detection button on and timer off, otherwise error tone (song) will sound. Press the Power button to "ON" position, confirmed by the power indicator light.

Acupoint Detection

When detecting acupoint, ensure timer is set to "OFF", and press detection button to "ON". Insert the acupoint locator plug into "detective out" socket (A or B), then adjust the "APD" knob until hearing a sound cue. Then, slowly adjust counter-clockwise until a suitable setting is found. Now hold the pen in your hand and place the point on your body until both a signal and light appear which shows the exact location of acupoints.

Based on the fact that the resistance of certain body points is lesser than others, and due to differing skin electrical resistances due to sex, age, health, and season, the electric current used must be adjusted slowly until comfortable.

Wave Form Selection

When selecting a waveform, ensure the timer is set to "On" position, and that all output frequency knobs are turned all the way down, otherwise, the error tone will sound. Multiple waveforms can be selected at the same time by holding down the respective buttons simultaneously. Once the device is powered, the output can be increased for each channel. The following traits describe the different wave forms that can be used for various applications (electro acupuncture, massage, etc):

• Analgesic: Continuous Wave (Dense wave), Dense-Disperse wave.
• Temporarily stimulate local circulation: Dense-Disperse wave.
• Muscle & nerve excitement: Intermittent, Respiration, Ripple and Disperse waves.
• Stimulation of collagenous tissue: Disperse wave.

Galvano-Acupuncture

Insert acupuncture needle into patient's acupoint, and connect the ouput clips to the needle. Regulate output strength as needed.

Electro Pulse Massage

Affix the two electric-conductive rubber pieces to the place to be massaged (or to the areas of girth). Then, connect the lead wires to the pads, while plugging the other end of the wire into any one of the output sockets in the lower part of the device. Several output ends may be used at the same time for enhancing the rehabilitation.