Aparat sudura fibra optica NOU! cu garantie 2 ani
-
Produs:Nou, Certificat de garanție 24 luni
-
Numar articol:174066568
-
Disponibilitate:Indisponibil
-
Preț:6.999,00 Lei
-
Anuntul a expirat la:26.07.2017, 00:04
-
Ai o nelamurire?
-
Vandut de:
-
Vinde si tu:Pune in vanzare un produs ca acesta
-
Optiuni:
Descriere
Vânzatorul este direct răspunzator pentru produsul afișat în această pagină.
Disponibilitate: Indisponibil - Vezi produse similare
Specificatii
Aparat sudura fibra optica, model EasySplicer, fabricat de catre SCANDINAVIA/Suedia
NOU la cutie!
Garantie 2 ani
Se accepta proba
Se poate oferi Factura
Accesorii incluse:
- Stripper
- Cleaver
- Acumulator
- Incarcator
- Cuptor(integrat)
- 2 perechi de holdere de fibra 250um si 900um
- CD cu Manual de utilizare si CD instructiuni Video
- Geanta de transport robusta
Specificatii tehnice:
* Fusion splicing made easy and affordable with the EasySplicer.
* For both Singlemode and Multimode fibres.
* Splicing time of less than 7 seconds.
* Loss estimation.
* Pull test of performed splices.
* Built in oven.
* Easy to use and to carry along.
* Perfect for the FTTH installer.
2 year Splicer Warranty
The EasySplicer is a Swedish made Fusion Splicer, designed for daily use on fibre optic installations.
It´s compact and portable. The construction is very rugged and designed to be used out in the field.
The design of the EasySplicer differs from other Fusion Splicers as it focusses on the installer/user. Many of the Splicers on the market are, even if very competent, difficult to use and require a lot of training before they can be operated.
The EasySplicer is very easy to use. It doesn´t take more than an hour for anyone to learn how to use the Splicer and start working with it.
The EasySplicer operates with three buttons only. In most cases the user will only have to use the main button to perform the splice. Still, the precision of the unit is extremely high. It makes typical
Splicing with a loss of 0.03 dB (Singlemode). After splicing, it pull tests the splice, makes a loss estimation of the splice and tells if something is wrong. Such information is also provided before splicing (Like; Bad fibre and Dirty fibre).
The battery-pack inside the unit is small but very powerful. The unit can perform some 40 splices (with oven operation) before it needs to be recharged. The fixed battery can be recharged whilst the unit is in use.
The EasySplicer is constantly calibrating itself for environment changes (like; moisture). This can also be done manually, i.e. at the start of the day. Calibration is very easily performed (within seconds) and makes sure that the splicing is made perfect.
The EasySplicer uses the V-grove method for splicing (same as Ribbon-splicers) which has made it possible to keep the size of the unit small. It also makes this unit extremely cost-effective.
The EasySplicer is one of the most inexpensive splicers on the market, yet it has the performance of units 4-5 times more expensive.
Technical specification
Splicing method V-grove (cladding alignment).
Fibber Types SMF, MMF 50/125µm and 62.5/125µm fibre,
250µm primary and 900µm secondary coated fibre.
Fibber Handling Fibber holders, 2 pairs (250 and 900)
Splice Programs 2 pre-defined. SMF & MMF
Typical Splice Loss 0.03dB SMF, 0.01dB MMF
Typical Cycle Time 7s + 50s (splice cycle + oven cycle)
Sleeve Dimensions Max 64mm length, 2-5mm diameter supported by oven
Communication USB, mini usb plug.
Memory Internal 1MB, External SD-Card.
Monitor LCD, colour, 2.8 , 320x240 pixels
Magnification Camera 140x
Operating Environment 0-40°C, max 95% RH, non-condensing
Size 230x98x53mm
Weight 800g
Power Sources External power supply, 6V, 1.25A, 100-240VAC 50-60Hz,
Built in Li-Ion battery pack
Splicing Capacity 40 splicing cycles with oven.
Additional Features Loss estimation, Fibber fault detection, Pull test,
SD-card for logging etc.
Modalitati de livrare si plata
LIVRARE
In Bucuresti
-
- Predare personala in max. 3 zile lucratoare
PLATA
- - La predare
- - Ramburs
- - Online
Politica de retur
- - Produsul nu se poate returna.