Aplificator digital DY-AP3015 DC 8-24V 30W * 2 Clasa D Stereo
Cost unic de transport la toate comenzile acestui vanzator
-
Produs:Nou, Fără garanție
-
Numar articol:222397101
-
Disponibilitate:Indisponibil
-
Preț:44,00 Lei
-
Anuntul a expirat la:29.04.2024, 02:15
-
Ai o nelamurire?
-
Vandut de:
-
Vinde si tu:Pune in vanzare un produs ca acesta
-
Optiuni:
Descriere
Vânzatorul este direct răspunzator pentru produsul afișat în această pagină.
Disponibilitate: Indisponibil - Vezi produse similare
Specificatii
1.Description:
DY-AP3015 is a high-power stereo audio module.Dual channels
audio signal output.Built-in amplifier module therefore it can
connect to loudspeaker directly.It is ideal for DIY speakers and
transponders.
2.Features:
1>.Width work voltage range
2>.Applicable multiple type speakers
3>.Knob adjustment
4>.Support reverse connection protection
5>.Support short circuit protection
6>.Self-recovery overheat protection
3.Parameters:
1>.Product name:DY-AP3015 Stereo Power Amplifier
Module
2>.Model:DY-AP3015
3>.Work Voltage:DC 8V-24V
4>.Work Mode:Class D(PWM)
5>.Channel:Dual channel
6>.Output Power:
6.1>.Output power 18W*2 at 12V 4ohm
6.2>.Output power 10W*2 at 12V 8ohm
6.3>.Output power 15W*2 at 16V 8ohm
6.4>.Output power 20W*2 at 20V 8ohm
6.5>.Output power 30W*2 at 24V 8ohm(Need add extra heat
sink!)
7>.Match speaker(30W~150W):
7.1>.4ohm at 8V~12V
7.2>.8ohm at 8V~24V
8>.Work Temperature:-40℃~85℃
9>.Work Humidity:0%~95%RH
10>.Module Size:59*32*14mm
4.Use steps:
1>.Choose the right speaker and connect as shown in wiring
diagram.
2>.Connect to right power supply from input terminal.
3>.Connect audio signal from 3.5mm socket or blue
terminal.
4>.Test and use.
5.Application:
1>.Modified speaker
2>.Amplifier equipment
3>.Repair replacement
6.Note:
1>.The power amplifier board should be as far away as
possible from the WIFI signal (router) avoid signal
interference.
2>.Recommended power supply voltage DC 8~24V.Module will be
damaged if input voltage is more than 26V.
3>.Input voltage can not more than 12V if connect 4ohm
speaker.
4>.Input voltage can not more than 24V if connect 8ohm
speaker.
5>.It is recommended to use a power supply of 2A or
higher.
6>.It need add extra heat sink if output power is more than
20W*2.
7>.Please don’t use too long wires to avoid signal
interference.
8>.It is recommended to use a speaker above 30W to avoid
speaker damage.
9>.Please read use manual and description before use.
7.Package:
1>.1piece DY-AP3015 Stereo Power Amplifier
Module
Galerie foto
Modalitati de livrare si plata
LIVRARE
In Bucuresti
-
- Predare personala - zona regie , careffour orhideea in max. 1 zi lucratoare
-
- Prin Posta Romana - Coletarie - 18 Lei in max. 3 zile lucratoare
In Romania:
-
- Prin Posta Romana - Coletarie - 18 Lei in max. 4 zile lucratoare
PLATA
- - La predare
- - Ramburs
Politica de retur
- - Produsul nu se poate returna.