ATF 4 in 1 adaptor V2
-
Produs:Nou, Fără garanție
-
Numar articol:186718469
-
Disponibilitate:Indisponibil
-
Preț:110,00 Lei
-
Anuntul a expirat la:15.11.2017, 11:12
-
Ai o nelamurire?
-
Vandut de:
-
Vinde si tu:Pune in vanzare un produs ca acesta
-
Optiuni:
Descriere
Vânzatorul este direct răspunzator pentru produsul afișat în această pagină.
Disponibilitate: Indisponibil - Vezi produse similare
Specificatii
This adapter allows you to use special functions with your ATF Box, ATF Lightning or ATF Nitro. Thes features include JTAG / EMMC / ISP / MMC CARD ATF-V2 All in 1 Adapter For ATF Box This adapter allows you to use special functions with your ATF Box, ATF Lightning or ATF Nitro. These features include: JTAG / EMMC / ISP / MMC CARD This Version 2 Adapter has some dramatic improvements over the original ATF 4-in-1 adapter No need to modify / void warranty on your ATF Box to use this adapter Technical Improvements of ATF-V2 Version This Version 2 Adapter has some dramatic improvements over the original ATF 4-in-1 adapter See image below The Switch ON = Strong PULL-UP Resistors will be applied to eMMC CMD (BLUE) and DATA (GREEN) Lines. ---> This is very usefull for phones that require VccQ and Vcc Power Connections (Samsung, HTC etc) OFF = PULL-UP Resistors WILL NOT be used. ---> This is normally done with Nokia Lumia Phones which does not require VccQ and Vcc Connections For a more stable connection, set switch to ON and make sure to connect required power to VccQ and Vcc Lines Voltage Jumper For Micro SD Cards 3.3v = Most New/Old Micro SD Cards are Compatible with 3.3v Vcc 1.8V = We have prepared a 1.8v Vcc for Future Low-Powered Micro SD Cards EMMC Jumper [For eMMC Use Only] NC = Secondary CLOCK will not be used for eMMC Communication CLK2 = Secondary CLOCK will be used for eMMC Communication When adapter is used for a NON-EMMC Connection such as JTAG or Micro SD Card, make sure this DIP Switch is on the NC Position. CLK2 is NOT REQUIRED for most eMMC Chips, but setting DIP SWITCH to CLK2 will give you a stronger CLK (RED) Signal for better eMMC Communication. This package contains the following items: 1 X Official ATF Version 2 All in 1 Adapter for ATF Box 1 X Set of Coloured JTAG Wires 3 X FPC Ribbon Cables 1 X Lumia 510 / 610 Connector 1 X Molex port for Lumia 610/510 (needed because some 610 / 510 do not have molex already onboard) 2 X BGA PCB 1 X Nokia mini opening tool kit containing: 1 X Leaver / Opener for Nokia disassembly 1 X Screwdriver for Nokia disassembly 2 X Plastic opening picks for Nokia disassembly 1 X Suction cup
Modalitati de livrare si plata
LIVRARE
In Sibiu
-
- Predare personala in max. 1 zi lucratoare
PLATA
- - La predare
- - Ramburs
- - Ramburs cu Garantia de Livrare
Curierul special îți livrează produsul pe care tu îl achiți la primire. Dacă produsul nu este ca în descriere, îți recuperezi banii, inclusiv taxele de transport.
Politica de retur
- - Produsul se poate returna in maxim 3 zile lucratoare
- - Metoda de retur: Ramburs contravaloare produs
- - Costul transportului va fi suportat de catre cumparator
- - Alte detalii: Retur acceptat in conditiile Garantiei de Livrare