Ceas spion de mana 8GB
Cost unic de transport la toate comenzile acestui vanzator
-
Produs:Nou, Fără garanție
-
Numar articol:158959544
-
Disponibilitate:Indisponibil
-
Preț:149,99 Lei
-
Anuntul a expirat la:21.09.2015, 10:15
-
Ai o nelamurire?
-
Vandut de:
-
Vinde si tu:Pune in vanzare un produs ca acesta
-
Optiuni:
Descriere
Vânzatorul este direct răspunzator pentru produsul afișat în această pagină.
Disponibilitate: Indisponibil - Vezi produse similare
Specificatii
Pret fix!!!
Pentru cantitate mai mare cumparata se ofera discount.
Pentru disponibilitate produs sau informatii intrebati pe forum.
Features:
- Brand New and High quality
- Video format: AVI
- Video encoding: M-JPEG
- Video resolution: 1280*960VGA
- Video frame rate: 30fps
- Media playing software: Attached software of the operating
system or
Mainstream audio and video media playing software - Picture format: JPG
- Picture pixels: 3264*2448 (8M Pix)
- The ratio of image: 4:3
- Supporting system: Windows ME/2000/XP/2003/Vista, Mac O/S, Linux
- Battery capacity: 200mAh
- Capacity: 8GB
- Working time: About 70 minutes
- Charging voltage: DC 5V
- Interface type: F2.5 USB
- Storage support: Nano flash
- Battery type: High-capacity lithium polymer
Operating:
- A. Parts Description:
A.1 Indicator: Status Indicator (7): blue light is
the photo taking mode; red light for the video recording mode.
A.2
Button(4): Touch the button for the start.
A.3 Socket(1): The 2.5 4 pin USB
socket is used to connect with computer or charger. It is the interface for data
transfer and charging.
A.4 Microphone and camera: Microphone (2) is used to
get the sound signal ;(3) is used to get the image signal.
A.5 Time setting:
It is to set the time of this watch. - B. ON/OFF: Press button (4) for 2 seconds to start the device.
It gets into
the photo recording mode. Meanwhile the blue light indicator is on. - C. Take photo: In the photo-taking mode, the device enters into
the standby
status for photo-taking. Now the blue light is on. Press the button (6) for 1
second. One flashing blue light indicates that the device completes the photo
taking and file saving job. Then it returns to the standby mode.
Note: Make
sure there is adequate light in the surrounding and the camera is not blocked by
other items. Keep the camera upright and stable. And the object should be more
than 50cm from the camera. - D. Record video: In the photo mode , long press operation
button 2 seconds,
the camera into the video mode , this time the red light flashes, in order to
save system power and began recording in about 3S bell, the status indicator
light will automatically switch off, this time the video is still at the video
mode , and if the state recognized the camera, or a new operation, briefly press
the operation button once to stop recording, save the file, this time to resume
a long bright blue light. - E. Record sound:sart state, a long bright blue light, short the
switch
machine key (Figure 4), blue light began to blink, in order to save system power
and began recording in about 3S bell, the status indicator light will
automatically switch off, short the switch machine to save the and enter the
camera recording standby mode, this time a long bright blue light - F. PC camera: Hold down the Operation button (Figure 6), you
can connect the
device with computer USB interface, you can enter the PC Camera (webcam) mode.
In this mode, your camera can be used as a PC camera, with your friends online
video chat, take photos, and so on.
Note: According to the computer system
configuration or difference, the computer may not detect a camera function by
once, if the computer can not enter the camera function, but into a Udisk.
Please remove the camera and connect the camera to the computer again; If you
are the first time to use the PC camera function on your computer, please
install the drivers on the CD or dealers provided. Please connect the data cable
to the device at first, then connect the other side to the Computer. - G.Connect the computer: In standby or OFF mode, you can connect
the device
with the computer. The computer will pop up a removable disk logo. There is an
image file directory for: * Disk \ _REC \ 100MEDIA. During video recorder and
computer transfer data, the blue light flashes rapidly. For the disconnection,
please click ?SAFELY REMOVE HARDWARE? on the right bottom corner of the task
bar. Then click to stop the ?USB mass storage device?. Unplug the USB. The
disconnection completes.
Note: According to the computer or system
configuration, there will be slight difference for the time of identifying
removable disk. Please be patient. During this period, please do not press the
button to avoid the bad impact of computer hardware. If the computer does not
identify the removable disk long time, disconnect and reconnect the device. If
the computer is unable to identify the hardware yet, make sure your operating
system, driver and USB cable are all in normal condition. Please make sure to
disconnect the device in accordance with the normal process to avoid the
possible damage for computer and recorder. - H.Charge: Connect to computer USB interface or charger. During
the charging,
the red light flashes slowly. When the battery is fully recharged, the red light
stops flashing.
Note: The recorder is with built-in high-capacity lithium
polymer battery. The battery is with no memory effect. It can be used and
charged at anytime. But for the initial five times of charging, please charge
battery to saturation after the battery runs out. It is to activate the battery
maximum capacity and maintain the standard working time.
Package Included:
- 1 x Waterproof Spy Camera DVR Watch(8GB)
- 1 x USB Cable
- 1 x AC Adapter
?
Modalitati de livrare si plata
LIVRARE
In Pitesti
-
- Predare personala in max. 15 zile lucratoare
PLATA
- - La predare
- - Ramburs
Politica de retur
- - Produsul nu se poate returna.
Fii primul care scrie un review
Spune-ti parerea acordand o nota produsului