CJMCU CP2102 MICRO USB to UART TTL Module 6Pin Serial Converter UART (FS01214)
-
Produs:Nou, Fără garanție
-
Numar articol:197364251
-
Disponibilitate:Indisponibil
-
Preț:29,00 Lei
-
Anuntul a expirat la:16.05.2019, 08:06
-
Ai o nelamurire?
-
Vandut de:
-
Vinde si tu:Pune in vanzare un produs ca acesta
-
Optiuni:
Descriere
Vânzatorul este direct răspunzator pentru produsul afișat în această pagină.
Disponibilitate: Indisponibil - Vezi produse similare
Specificatii
1, the original chip CP2102, generate COM port after
installing the driver.
2, then the standard input MICRO MINI-USB cable connected to
the computer USB interface, with 3.3V and 5V two power
output
3, with a resettable fuse. In the event of accidental
short-circuit can effectively protect your device and computer USB
port to download
4, on-board status indicators, receiving indicator properly
installed drive status indicator remains, send and receive
indicator flashes when the communication with run LED
indicator.
5, supports baud rates from 300bps ~ 1Mbps between
6, the communication format support: 1) data bits 5,6,7,8; 2)
support 1.5, 2 stop bits; 3) odd, even, mark, space, none
parity
7, supported operating systems: windows 8.1 / 7 / vista / xp /
98, Mac OS-X / OS-9, Linux
8, USB seat MICRO MINI-USB interface Block
9, chip components for the regular company of welding, stable
quality, beautiful appearance
10 with DTR trigger signal output can be directly arduino pro
mini ATMEGA328P and other Arduino board download
traffic.
11, module size: 16mm * 20mm super small.
Features:
1. embedded USB transceiver, no external circuit
device
2. containing clock circuit, no external circuit
device
3. contains power-on reset circuit
The on-chip voltage regulator within the 3.3V
output
5. Meet the USB2.0 specification requirements
6.SUSPEND pins support USB suspend state
7. asynchronous serial data bus compatible with all handshakes
and modulation controller interface signals
8. Support data format is 8 data bits, 1 stop bit and the
parity bit
9. connotation 512 byte receive buffer and 512 byte transmit
buffer
10. Supports hardware or X-ON / X-OFF Handshake
How to install the driver
win7 / win8
1, first open the package, like the way next, remember
installation directory
2, according to the following method to start the
service
3. Locate the driver in Device Manager, select Update Driver,
browse my computer for driver,
select the directory just installed, determine waiting
like
win8.1
Right update drivers automatically find the drivers, it will
prompt the driving data is invalid, in fact, the problem often
encountered in windows8, the drive is no problem, the beginning has
been installed on, and later discovered may be a hardware
incompatibility.
If you are using Windows8 or windows 8.1, but is non-genuine
ghost or other systems, and uses a variety of optimization tools
Streamlining system, then in the process of installing the driver,
you may encounter the "Data invalid" wrong
"Invalid Data" solutions are as follows:
1, press Winkey + R on the keyboard, the pop-up "Run" dialog,
enter "services.msc",
also by under "Computer Management" window, find the
"service";
2, found in the list of services "Device Install Service" and
"Device Setup Manager" two service items,
make sure these two services is turned on, if not open, you
can click the left side of the "Start" service.
Modalitati de livrare si plata
LIVRARE
In Timisoara
-
- Predare personala in max. 1 zi lucratoare
PLATA
- - La predare
- - Ramburs
Politica de retur
- - Produsul nu se poate returna.