Driver de control pentru motor pas cu pas A3967 EasyDriver
- La predare
-
Ramburs cu Garantia de Livrare
Curierul special îți livrează produsul pe care tu îl achiți la primire. Dacă produsul nu este ca în descriere, îți recuperezi banii, inclusiv taxele de transport.
- Online
Descriere
Raporteaza produsVânzatorul este direct răspunzator pentru produsul afișat în această pagină.
SKU: e.035
Specificatii
Produsul este nou!
Produsul este
la fel cu cel prezentat in fotografii!
Atenție!
Produsul este destinat specialiștilor și persoanelor pasionate de electronică și nu include alte instrucțiuni de asamblare sau utilizare.
Descriere în limba engleză:
The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).
EasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor.
The EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V.
Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control!
EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors.
On this version (v4.4) we fixed the silk error on the
min/max adjustment.
This is the newest version of EasyDriver V4 co-designed
withBrian Schmalz.
It provides much more flexibility and control over your stepper motor, when compared to older versions.
The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution.
The sleep and enable pins are also broken out for further
control.cjmcu made.
Note:Do not connect or disconnect a motor while the driver is
energized.
This will cause permanent damage to the A3967
IC.
Note:
This product is a collaboration with Brian Schmalz.
A portion of each sales goes back to them for product
support and continued development.
Features:
A3967 microstepping driver
MS1 and MS2 pins broken out to change microstepping
resolution to full, half, quarter and eighth steps (defaults to
eighth)
Compatible with 4, 6, and 8 wire stepper motors of any
voltage
Adjustable current control from 150mA/phase to
750mA/phase
Power supply range from 7V to 30V.
The higher the voltage, the higher the torque at high speeds
Informații despre transport:
Se expediază în toată țara prin curierat rapid fără limită de kilometri în sistem ramburs.
Dacă aveți nelămuriri sau întrebări vă rog nu ezitați să ne sunați sau să ne scrieți.
Modalitati de livrare si plata
LIVRARE
In Galati
-
- Predare personala - Galati, strada Brailei, nr.68 in Mazepa 1 la Agentia CFR in max. 1 zi lucratoare
-
- Prin curier cu Garantia de Livrare - 18 Lei in max. 2 zile lucratoare
In Romania:
-
- Prin curier cu Garantia de Livrare - 18 Lei in max. 2 zile lucratoare
- Ridicare de la locker Joi, 9 Mai. - 13,09 Lei
PLATA
- - La predare
- - Ramburs cu Garantia de Livrare
Curierul special îți livrează produsul pe care tu îl achiți la primire. Dacă produsul nu este ca în descriere, îți recuperezi banii, inclusiv taxele de transport.
- - Online
Politica de retur
- - Produsul se poate returna in maxim 3 zile lucratoare
- - Metoda de retur: Ramburs contravaloare produs
- - Costul transportului va fi suportat de catre cumparator
- - Alte detalii: Retur acceptat in conditiile Garantiei de Livrare