DS3231 AT24C32 IIC module precision Real time clock (FS00866) - fara baterie
-
Produs:Nou, Fără garanție
-
Numar articol:181346327
-
Disponibilitate:Indisponibil
-
Preț:29,00 Lei
-
Anuntul a expirat la:16.05.2019, 08:06
-
Ai o nelamurire?
-
Vandut de:
-
Vinde si tu:Pune in vanzare un produs ca acesta
-
Optiuni:
Descriere
Vânzatorul este direct răspunzator pentru produsul afișat în această pagină.
Disponibilitate: Indisponibil - Vezi produse similare
Specificatii
Atentie: nu contine baterie.
DS3231 is a low-cost, extremely accurate I2C real-time clock
(RTC), with an integrated temperature-compensated crystal
oscillator (TCXO) and crystal. The device incorporates a battery
input, disconnect the main power supply and maintains accurate
timekeeping. Integrated oscillator improve long-term accuracy of
the device and reduces the number of components of the production
line. The DS3231 is available in commercial and industrial
temperature ranges, using a 16-pin 300mil SO package.
RTC maintains seconds, minutes, hours, day, date,
month, and year information. Less than 31 days of the month, the
end date will be automatically adjusted, including corrections for
leap year. The clock operates in either the 24 hours or band / AM /
PM indication of the 12-hour format. Provides two configurable
alarm clock and a calendar can be set to a square wave output.
Address and data are transferred serially through an I2C
bidirectional bus.
A precision temperature-compensated voltage
reference and comparator circuit monitors the status of VCC to
detect power failures, provide a reset output, and if necessary,
automatically switch to the backup power supply. In addition, / RST
pin is monitored as generating μP reset manually.
Save time and high precision addition, DS3231 also has some other
features that extend the system host of additional features and a
range of options. The device integrates a very precise digital
temperature sensor, through the I2C * interface to access it (as
the same time). This temperature sensor accuracy is ± 3 ° C.
On-chip power supply control circuit can automatically detect and
manage the main and standby power (i.e., low-voltage battery) to
switch between the power supply. If the main power failure, the
device can continue to provide accurate timing and temperature,
performance is not affected. When the main power re-power or
voltage value returns to within the allowable range, the on-chip
reset function can be used to restart the system
microprocessor.
Module parameters:
1 Size: 38mm (length) * 22mm (W) * 14mm (height)
2 Weight: 8g
3 Operating voltage :3.3 - 5 .5 V
4 clock chip: high-precision clock chip DS3231
5 Clock Accuracy :0-40 ℃ range, the accuracy 2ppm, the error was
about 1 minute
6 calendar alarm clock with two
7 programmable square-wave output
8 Real time clock generator seconds, minutes, hours, day, date,
month and year timing and provide valid until the year 2100 leap
year compensation
9 chip temperature sensor comes with an accuracy of ± 3 ℃
10 memory chips: AT24C32 (storage capacity 32K)
11.IIC bus interface, the maximum transmission speed of 400KHz
(working voltage of 5V)
12 can be cascaded with other IIC device, 24C32 addresses can be
shorted A0/A1/A2 modify default address is 0x57
13 with rechargeable battery LIR2032, to ensure the system after
power failure, the clock move any natural normal
14 Packing: single anti-static packaging
Wiring instructions (with Arduino uno r3 for example):
SCL → A5
SDA → A4
VCC → 5V
GND → GND
Shipping list:
1.DS3231 module a (tested good antistatic packaging )
Modalitati de livrare si plata
LIVRARE
In Timisoara
-
- Predare personala in max. 1 zi lucratoare
PLATA
- - La predare
- - Ramburs
Politica de retur
- - Produsul nu se poate returna.