Kit Tanc Robot cu drivere pt motoare si circuit pt masurarea vitezei
-
Produs:Nou, Fără garanție
-
Numar articol:169936745
-
Disponibilitate:Indisponibil
-
Preț:199,99 Lei
-
Anuntul a expirat la:13.04.2016, 10:05
-
Ai o nelamurire?
-
Vandut de:
-
Vinde si tu:Pune in vanzare un produs ca acesta
-
Optiuni:
Descriere
Vânzatorul este direct răspunzator pentru produsul afișat în această pagină.
Disponibilitate: Indisponibil - Vezi produse similare
Specificatii
Unlike most of the Smart Tanks which rely on friction to drive
the track, this newly designed Smart Tank has track gears directly
connected to the power system to avoid track slipping issue.
Together with the well designed size and location of the bearings,
this new smart tank is ensured to have seamless motion.
Features:
• L9110 Connected and Included
• Operating Voltage: 3V - 12V
• Opto Coupler Speed Sensor is Included
• Chassis Kit, Belts, Motors Are Included
• Arduino Compatible
• Motor Operating Voltage: 3V - 8V
• Motor Maximum Torque: 1.5kg.cm at 7.2V
• Motor Speed Without Load: 250rpm/m at 7.2V
• Motor Load current: 250mA at 7.2V
Pin Description:
• GND: Ground Connection of LM393 and Speed Sensor
• VCC: Power Connection of LM393 and Speed Sensor
• IA: Motor Driver L9110 Reverse Input
• IB: Motor Driver L9110 Forward Input
• SPEED: Output of Speed Sensor
• M.P-: -ve Power Supply of L9110 and Motor
• M.P+: +ve Power Supply of L9110 and Motor
Note:
• Common Ground is needed for the Controller Board and the
Tank.
Size:
5" x 7.4" x 2"
Driving wheel - caterpillar tooth coupling dynamic system and
transmission system directly
Driving wheel with track, not on the market by the force of
friction affects the belt, the driving wheel and track perfect
occlusion, tension affects the treads, avoid skidding tracks, in
the true sense of caterpillar vehicles structure.
Idler - another one of the typical structure of caterpillar
vehicles structure
Idler is a driven wheel, are used to support the treads, induction
and with caterpillar regulator and adjust tightness of caterpillar.
It is composed of wheel hub, wheel, ball bearing, wheel cover,
fixed nut, double row ball bearings, supporting cup and wrap gear
oil, etc. Support belt wheel is mainly used to support with a
caterpillar, not have this kind of belt wheel, crawler collision
occurs. One end of the supporting wheel shaft and firmly fixed on
the body. Because of the pulley diameter smaller than road wheel,
rotating speed of the bearing is much higher, but it only supported
on a track, namely crawler weight 1/3, so as to reduce the
oscillation of the crawler.
Bearing - 16 pieces of steel bearings
Used the 16 pieces of steel bearings, perfect combination, the
crawler drive in operation process to reduce the jitter,
caterpillar is not easy to slide, and friction will drive down to
the fullest.
The driving wheel and idler perfect cooperation
Motor speed measuring precision speed measuring system (exclusive)
-
Pick up day and MC - 2 precision speed measuring system, a patented
product, higher precision, more reliable operation and precision is
TT motor encoder speed of the hundreds of thousands of times.
Motor driver - strong anti-interference, good heat
dissipation
Day and take the lead to L9110 chip to control the robot car model,
draw in many others to follow, also used for the tracked vehicle
chassis, this at the beginning of the design, motor drive the patch
9110, through a variety of test performance, poor SMT chip heat
dissipation and motor drive ability is low, PASS directly, we also
adopt independent triode H bridge driver, good heat dissipation
performance results, but poor anti-jamming performance, through a
variety of design, proofing test, we finally choose L9110 discrete
component, power than SMT chip power is big, good heat dissipation,
the following work for continuous chip temperature in half an
hour.
Test - through a variety of professional test
Each TIANC day hit a variety of professional technology products
are through strict test, the following is a caterpillar vehicles
waveform test.
Interface - standard 2.54 row needle, dupont line joining
together directly
Motor can power alone, but can be by jumper cap from the system
GND: power supply cathode
VCC: positive
IA and IB: electrical signal input
SPEED: SPEED interface
The cathode M.P - : motor
The anode M.P + : motor
Brace - adjust at will, and wide applicability
Using four M3 longer screw, can adjust the screw on the slider move
any brace position, bearing alloy, wood, acrylic and other chassis,
can also be bearing and universal circuit board, flexible
application convenient user.
Form a complete set of caterpillar vehicles chassis platform, user
can select MCU core board (51 series/AVR series), power management,
or other sensor function module
Connecting rod - adjust width, body width is decided by you
Material has been improved for the stainless steel base plate
support accessories, caterpillar chassis DD1-1 2 slices mirror
circuit board as power and support components, connectors used
three article 5 mm (M5), USES the linear cutting cut to, high
precision, can be replaced by the customers themselves is suitable
for the size you need, has reached the caterpillar vehicles of
different width, compatible with the user's circuit board and
sensors, custom also can discuss our sales customer service, you
need to the length of the (within 30 cm to prevent deformation.
Modalitati de livrare si plata
LIVRARE
PLATA
- - Ramburs
- - Ramburs cu Garantia de Livrare
Curierul special îți livrează produsul pe care tu îl achiți la primire. Dacă produsul nu este ca în descriere, îți recuperezi banii, inclusiv taxele de transport.
Politica de retur
- - Produsul se poate returna in maxim 3 zile lucratoare
- - Metoda de retur: Ramburs contravaloare produs
- - Costul transportului va fi suportat de catre cumparator
- - Alte detalii: Retur acceptat in conditiile Garantiei de Livrare