LED display 4-digit module with clock for Arduino (d.6262E)

Specificații în limba engleză:

1. Size: 42 x 24 x 12 mm

2. Temperature display range: -9 to 60°C

3. Temperature error correction setting feature, set the range: -5 to 5°C

4. Working voltage: 3.3V~5V. (Note: the lower the voltage, the lower the luminance, the lower the power consumption)

Features:

1. The module is a 10 foot with a clock point, with four common anode tube (0.36 inch) display module for driver for IC 595, only two signal lines can make the MCU control 4 digit 7 segment digital tube.

2. It has 24 hour timing error correction settings, can set every 24 hours error correction, setting range is -9 to 9 seconds. (Note: To make this effective, it must be 24 hours of continuous power)

3. 4 display modes: A. display time; B. display data; C. display temperature; D. alternate display time, data and temperature

Pachetul conține:
• 1 bucată x display 4-digit (cod produs: d.6262E)

Se expediază în toată țara prin curierat rapid în sistem ramburs.