Avem peste 6.000.000 de produse de la magazine si vanzatori profesionisti in Okazii.ro Marketplace
Cos cumparaturi
Favorite

Modul bluetooth JDY-62A mini antenna bluetooth for Arduino for IOS (j.048)

Livrare gratuita la comenzile de 200 lei

Descriere

Vânzatorul este direct răspunzator pentru produsul afișat în această pagină.

Disponibilitate: Indisponibil - Vezi produse similare

Specificatii

Produsul este nou!

Produsul este la fel cu cel prezentat in fotografii!

Specificații în limba engleză:

The pins can be soldered with pin headers or patches, the pin spacing is 2.54mm, and 2.54 pin headers can be soldered
 
 
Pin description:
1. VCC: The voltage range is 4.2 to 5V, especially the power supply cannot exceed 5V
2. GND: power ground
3.L: Left channel output
4.R: Right channel output
5. MUTE: low level when playing music, stop playing and output high level
6.KC: empty pin
 
Wiring diagram:
 
The Bluetooth audio module has very high power requirements, otherwise it will affect the audio quality. The power supply must be added with an LC filter circuit, especially a switching power supply.
 
Common problem:
1. Bluetooth cannot be searched:
Generally, it is caused by power interference, and the power line must be added with an LC filter circuit
 
2. Whether it supports 3.7V power supply:
The module is powered by 5 volts by default. You can replace the upper diode of the JDY-62 module with a 0805 package 0R resistor, or use a short circuit with a wire, so that it can be powered by a lithium battery
Note: When 3.7V bulk order is required, please indicate 3.7V power supply before placing the order. The default is 5V power supply.
 
3. The Bluetooth signal is too weak
Do not wire or coat copper under the Bluetooth module antenna, or there must be no metal shielding around the antenna
 
4. The current is too loud
Generally caused by power ground interference, it is recommended that the power amplifier wiring should not be too long, and the Bluetooth ground and power ground should be separated.



Pachetul conține:
• 1 bucată x modul bluetooth JDY-62A (cod produs: j.048)

Se expediază în toată țara prin curierat rapid în sistem ramburs.

• DPD - 15,5 lei
• FAN COURIER - 15,5 lei
• Urgent Cargus - 15,5 lei
• Poșta Romană (Prioripost) - 15,5 lei

Dacă aveți nelămuriri sau întrebări vă rog nu ezitați să sunați sau să-mi scrieți.

Modalitati de livrare si plata

LIVRARE

PLATA

  • - Ramburs cu Garantia de Livrare GdL

    Curierul special îți livrează produsul pe care tu îl achiți la primire. Dacă produsul nu este ca în descriere, îți recuperezi banii, inclusiv taxele de transport.

Politica de retur

  • - Produsul se poate returna in maxim 3 zile lucratoare
  • - Metoda de retur: Ramburs contravaloare produs
  • - Costul transportului va fi suportat de catre cumparator
  • - Alte detalii: Retur acceptat in conditiile Garantiei de Livrare
Fii primul care scrie un review

Spune-ti parerea acordand o nota produsului

Adauga review