Modul JDY-23 bluetooth 5.0 digital transmission CC2541
-
Ramburs cu Garantia de Livrare
Curierul special îți livrează produsul pe care tu îl achiți la primire. Dacă produsul nu este ca în descriere, îți recuperezi banii, inclusiv taxele de transport.
- Online
Descriere
Raporteaza produsVânzatorul este direct răspunzator pentru produsul afișat în această pagină.
SKU: j.1082W
Specificatii
Produsul este la fel cu cel prezentat in fotografii!
Specificații în limba
engleză:
JDY-23 product parameters |
|
model |
JDY-23 |
Working frequency |
2.4G |
Transmit power |
4db(maximum) |
Communication Interface
|
UART |
Operating
Voltage
|
1.8V – 3.6V |
Operating temperature |
-40℃ - 80℃ |
antenna |
Built-in PCB antenna |
Receiving
sensitivity
|
-97dbm |
Transmission distance |
60米 |
Master-slave
support
|
Slave |
Module size |
19.6 * 14.94 *1.8 mm(Length, width and height) |
Bluetooth version |
BLE 5.0(Compatible with BLE4.0, BLE4.2) |
Awakening state current |
800uA(Broadcast) |
Light sleep state current |
<50uA (Broadcast) |
Deep sleep
current
|
9uA (No broadcast) |
Instruction
parameter
saving
|
Parameter configuration power-down data is saved |
SMT soldering temperature |
<260℃ |
rf-TX/RX peak current |
5mA |
Pin definition
Pin function description
Features |
Description |
|
1 |
VCC |
Power supply (1.8-3.6V) |
2 |
NULL |
No |
3 |
NULL |
No |
4 |
OUTPUT1 |
IO1 output pin (support APP control high and low level) |
5 |
OUTPUT2 |
IO2 output pin (support APP control high and low leve) |
6 |
STAT |
Connection status pin, connected high, not connected low |
7 |
INPUT7/PWM4 |
INPUT7 mode: For the input pin, the APP can read the status of this pin. PWM mode: PWM4 output pin, APP can control
PWM4
pulse width
The default is: INPUT7 mode
|
8 |
OUTPUT3 |
IO3 output pin (support APP control high and low level) |
9 |
OUTPUT4 |
IO4 output pin (support APP control high and low level) |
10 |
OUTPUT5 |
IO5 output pin (support APP control high and low level) |
11 |
INPUT6/PWM3 |
INPUT6 mode: For the input pin, the APP can read the status of this pin. PWM mode: PWM3 output pin, APP can control
PWM3
pulse width
The default is: INPUT6 mode
|
12 |
INPUT5/PWM2 |
INPUT5 mode: For the input pin, the APP can
read
the status of this pin.
PWM mode: PWM2 output pin, APP can control
PWM2
pulse width
The default is: INPUT5 mode
|
13 |
OUTPUT6 |
IO6 output pin (support APP control high and low level) |
14 |
OUTPUT7 |
IO7 output pin (support APP control high and low level) |
15 |
INPUT4 |
For the input pin, the APP can read the status of this pin. |
16 |
EINT2 |
Interrupt input pin (in the connected state, press to actively send IO status to APP) |
17 |
ALED |
Broadcast indicator pin |
18 |
INPUT3/PWM1 |
INPUT3 mode: For the input pin, the APP can read the status of thi pin. PWM mode: PWM1 output pin, APP can control
PWM1
pulse width
The default is: INPUT3 mode
|
19 |
TXD |
Serial output pin (TTL level) |
20 |
RXD |
Serial input pin (TTL level) |
21 |
EINT1 |
Interrupt input pin (in the connected state, press to actively send IO status to APP) |
22 |
PWRC |
Sleep wake-up pin, active low
In the connected state, the AT command can be
pulled
low through the PWRC pin.
|
23 |
RST |
Reset pin, active low |
24 |
GND |
Power ground |
sequence |
instruction |
effect |
Master/Slave |
default |
1 |
AT+VER |
version number |
S |
JDY-23-V2.1 |
2 |
AT+RST |
Soft reset |
S |
- |
3 |
AT+DISC |
AT command disconnected |
S |
- |
4 |
AT+STAT |
00 |
||
5 |
AT+MAC |
MAC address |
S |
- |
6 |
AT+BAUD |
Baud rate |
S |
9600 |
7 |
AT+SLEEP |
Sleep |
S |
|
8 |
AT+NAME |
Broadcast name |
S |
JDY-23 |
9 |
AT+STARTEN |
Boot sleep or wake up |
S |
0(开机唤醒) |
10 |
AT+ADVIN |
Broadcast interval |
S |
1(200mS) |
11 |
AT+HOSTEN |
Slave mode or IBEACON working mode |
S |
0(从机) |
12 |
AT+IBUUID |
IBEACON's UUID |
S |
FDA50693A4E24FB1AFCFC6EB07647825 |
13 |
AT+MAJOR |
IBEACON's MAJOR |
S |
10 |
14 |
AT+MINOR |
IBEACON's MINOR |
S |
7 |
15 |
AT+IBSING |
Signal calibration at 1 meter |
0x32 |
|
16 |
AT+ALED |
Broadcast LED indicator switch |
1 |
|
17 |
AT+IBPWR |
IBEACON SING value |
S |
50 |
18 |
AT+DEFAULT |
reset |
S |
- |
19 |
AT+POWR |
Transmit power |
S |
8 |
20 |
AT+ENLOG |
Serial output LOG switch |
S |
0 |
21 |
AT+MTU |
Set the serial port to the APP to send a long number of packets |
S |
1 |
22 |
AT+BATT |
Set battery |
S |
0 |
JDY-23 mobile APP control OUT pin high and low level and read INT pin level wiring diagram
Pachetul conține:
• 1 bucată x modul JDY-23 bluetooth 5.0 digital
transmission CC2541 (cod produs: j.1082W)
Se expediază în toată țara prin curierat rapid în
sistem ramburs.
• Urgent Cargus - 15,5 lei
• Poșta Romană (Prioripost) - 15,5 lei
Dacă aveți nelămuriri sau întrebări vă rog nu ezitați să sunați sau să-mi scrieți.
Modalitati de livrare si plata
LIVRARE
In Ostrov
-
- Prin curier cu Garantia de Livrare - 18 Lei in max. 2 zile lucratoare
In Romania:
-
- Prin curier cu Garantia de Livrare - 18 Lei in max. 2 zile lucratoare
- Ridicare de la locker Joi, 16 Mai. - 13,09 Lei
PLATA
- - Ramburs cu Garantia de Livrare
Curierul special îți livrează produsul pe care tu îl achiți la primire. Dacă produsul nu este ca în descriere, îți recuperezi banii, inclusiv taxele de transport.
- - Online
Politica de retur
- - Produsul se poate returna in maxim 3 zile lucratoare
- - Metoda de retur: Ramburs contravaloare produs
- - Costul transportului va fi suportat de catre cumparator
- - Alte detalii: Retur acceptat in conditiile Garantiei de Livrare