Modul timer cu 1 releu si afisaj LCD OLED DC 6-30V USB 5V

Feature:

Supports high and low level trigger;

Emergency stop function;

Sleep mode, wake up with any button;

Automatically saves the parameters;

compatible with UART Set;

Continuously adjustable from 0.01 seconds to 9999 minutes;

Product Parameters:

Working voltage: 6V~30V, support micro USB 5.0 V power supply

Working current: 50mA

Static current: 15mA

Control current: 10 A (max)

Max Output load: DC 30V 5A and AC 220V 5A

Trigger signal source: High level trigger (3.0V~24.0V), low level trigger (0.0V ~0.2V), switching control (Potential free contact)

Service life: more than 100,000 times

Working temperature: -40-85°C

Suitable for battery: Storage battery, lithium battery

Reverse protection: Yes

Functions:

a)Automatically hibernation function/ Low power function: In the running interface, long press STOP to open or close automatically sleep function. (L-P selects ON to start the hibernation function, and OFF turns off the hibernation function);

b)Relay function selection: In the operation interface, shortly press STOP, the relay function is started or closed, 'ON' meets the conduction condition and the relay normally turns on, 'OFF' meets the conduction condition and the relay does not turn on; In the 'OFF' state, the system flashes 'OUT'.

c)Parameters view: In the operation interface, short press SET to display the current parameter setting in the system, without affecting the system normal operation.

d)Display content switching: In the P-5 P-6 mode, switch display content (runtime/cycle times) by pressing DOWN.