 |
Form Factor |
|
Dimensions |
-
12" x 13.05" (30.5cm x 33.2cm)
|
|
 |
CPU |
-
Dual 771-pin LGA Sockets
-
Supports up to two Intel® 64-bit
Xeon® processor(s) of the same
type below:
-
Quad-Core Intel®
Xeon®Processor
5400/5300 sequence
(Harpertown
/Clovertown processor)
up to 3.16 GHz
-
Dual-Core Intel®
Xeon®Processor 5200/5100/5000
sequence (Wolfdale
/Woodcrest/Dempsey processor) up to 3.40 GHz
|
System Bus |
-
1333 / 1066 / 667 MHz system bus
|
Operating System Software |
-
Supports 64-bit Operating Systems
-
Supports 32-bit Operating Systems
|
|
 |
Memory Capacity |
-
Eight 240-pin DIMM sockets
-
Supports up to 32 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
-
Dual rank memory bus
-
Memory must be populated in pairs
-
Memory Mirroring supported
|
Memory Type |
-
667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit,
240-pin gold-plated DIMMs
|
DIMM Sizes |
|
Memory Voltage |
|
Error Detection |
-
Corrects single-bit errors
-
Detects double-bit errors (using ECC memory)
-
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
|
 |
Chipset |
-
Intel® 5000P (Blackford) chipset
-
MCH + PXH + ESB2
|
SATA |
-
Intel ESB2 SATA 3.0Gbps Controller
-
RAID 0, 1, 5, 10 support (Windows Only)
-
RAID 0, 1, 10 support (Linux)
|
IPMI |
-
Support for Intelligent Platform Management Interface v.2.0
-
200-pin IPMI SO-DIMM socket (SIMSO)
-
(Optional: AOC-SIMSO(+))
|
Network Controllers |
-
Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet
Controller
-
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
-
Intel® I/OAT support for fast, scaleable, and
reliable networking
|
Graphics |
-
ATI ES1000 controller with 16 MB of video memory
|
Super I/O |
|
|
 |
Serial ATA |
-
Six Serial ATA ports
-
3 Gbps transfer rate
-
Six SATA hard drives supported
|
IDE |
-
Single EIDE channel supports up to two UDMA IDE devices (IDE-M,
IDE-S) including CF(Compact Flash) Card
-
Compact Flash (40-pin connector, IDE 1, single channel) slot
-
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
Floppy |
-
1 Floppy controller; 1.44 MB, 2.88 MB
|
LAN |
|
USB |
-
2x USB rear ports
-
3x USB internal headers
-
Total 5 USB 2.0 Compliant / 1.1 Compliant
|
VGA |
|
Keyboard / Mouse |
-
PS/2 keyboard and mouse ports
|
Serial Port / Header |
-
1 Fast UART 16550 serial port
-
1 Fast UART 16550 serial header
|
|
|
|
 |
 |
 |
1U Chassis |
-
CSE-815TQ-700V
-
CSE-815TQ-R650
-
CSE-815TQ-560
|
Important Chassis Notes |
-
To ensure system stability, a 500W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required]
|
|
 |
Left Universal Slot |
-
1 64-bit 133MHz PCI-X OR
-
1 (x8) PCI-e Slot
|
Right Universal Slot |
-
1 64-bit 133MHz PCI-X OR
-
1 (x8) PCI-e Slot
|
|
 |
BIOS Type |
-
8Mb Flash EEPROM with Phoenix® BIOS
|
BIOS Features |
-
Plug and Play (PnP)
-
SMBIOS 2.3
-
DMI 2.1
-
PCI 2.2
-
ACPI 1.0
-
USB Keyboard support
-
Hardware BIOS Virus protection
|
|
 |
Software |
-
Optional IPMI (Intelligent Platform Management Interface) 2.0
-
SuperDoctor® III
-
Watch Dog
-
NMI
|
Power Configurations |
-
ACPI Power Management
-
Main Switch Override Mechanism
-
Wake-On-Ring (WOR) header
-
Wake-On-LAN (WOL) header
-
Power-on mode for AC power recovery
-
Internal / External modem remote ring-on
|
|
 |
Voltage |
-
Monitors for CPU Cores, +3.3V, +5V, ±12V, +1.2V
-
5-Phase-switching voltage regulator with auto-sense from
0.8375V-1.60V
|
FAN |
-
Total of eight 4-pin fan headers supporting up to 8 fans
-
8x fans with tachometer status monitoring
-
Status monitor for speed control
-
Status monitor for on/off control
-
Low noise fan speed control
|
Temperature |
-
Monitoring for CPU and chassis environment
-
CPU thermal trip support
-
Thermal Control for 8x fan connectors
-
PSU I2C temperature sensing logic
-
Thermal Monitor 2 (TM2) support
|
LED |
-
CPU / System Overheat LED
|
Other Features |
|
|