Placa dezvoltare arduino ESP32 cu Bluetooth si WIFI micro usb CP2102
Descriere
Raporteaza produsVânzatorul este direct răspunzator pentru produsul afișat în această pagină.
Specificatii
Description:
1. The main body of the module is ESP-WROOM-32 module, and the
peripheral uses the USB serial port chip CP2102 to expand the micro
USB interface, which can be directly debugged by a USB connected
computer, and the data transmission is fast and stable.
2. It has power indicator (red light) and working status indicator
(blue light) on it, so you can know the status of the module at any
time.
3. There are two touch buttons, one is reset, the other is enable
module to enter the halberd program mode. In addition, the pins on
both sides of the development board are convenient for developers
to connect and use.
4. The module has powerful Bluetooth-compatible and WiFi functions.
As a Bluetooth-compatible and WiFi development board, it can obtain
rich resources from Lexin and anxinco official websites.
5. In addition, the module supports for NodeMCU and other
development environments, which expands the range of its resources
available and greatly improves the ease of learning and
development. Of course, it can also be widely used in Internet of
things occasions, such as home automation, wireless industrial
control, wireless positioning system signal, etc.
Feature:
1. The module is the ESP- WROOM-32 development board, and the ESP-
WROOM32 parameter characteristic is also the parameter
characteristic of the module.
2. 802.11b/g/WiFi + BT module.
3. Low power dual core 32-bit CPU, which can be used as application
processor;
4. The main frequency is up to 240MHz, and the operation capacity
is up to 600DMIPS.
5. Support UART / SPI / I2C / PWM / DAC / ADC and other
interfaces;
6. Support openOCD debugging interface;
7. It supports multiple sleep modes, and the current reaches 6.5ua
in deep sleep;
8. Embedded LwIP and FreeRTOS;
9. Support STA/AP/STA+AP mode;
10. Support Smart Config / Airkiss one key distribution
network;
11. General at command, easy to use;
12. Support local serial port upgrade and remote upgrade
(FOTA).
Specification:
SPIFlash: default 32Mbit
Bluetooth: Bluetooth-compatible 4.2 BR/EDR and BLE standards
Supporting interfaces: UART, SPI, SDIO, I2C, PWM, I2S, IR, ADC,
DAC
On chip sensors: Hall sensor, temperature sensor, capacitive touch
sensor
IO port: 22pcs
Serial port rate: 115200 BPS by default
Spectrum range: 2412 ~ 2484MHz
Antenna form: PCB antenna on board, gain 2dBi
Transmitting power: 802.11b: 17 ± 2dbm (11Mbps) 802.11g: 14 + 2dbm
(54Mbps) 802.11n: 13 ± 2dbm (MCS7)
Receiving sensitivity: CCK, 1Mbps: - 90dbm CCK, 11Mbps: - 85dBm
6Mbps (1 / 2bpsk): - 88dbm 54Mbps (3 / 464-qam): - 70dBm mcs7
(65mbps, 72.2mbps): - 67dbm
Power consumption: 300mA 3.3V
Security: WPA / WPA2 / WPA2 Enterprise / WPS
Power supply range: USB power supply: 5V pin power supply:
5.0V~12V
Working temperature: - 20 ~ 85 ℃
Storage environment: - 40 ~ 90℃, < 90% RH
Product size: 52 * 29 * 15mm/2.04*1.14*0.59''
Note:
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may
not show the actual color of the item. Thanks for your
understanding.
Galerie foto
Modalitati de livrare si plata
LIVRARE
In Bucuresti
-
- Predare personala - zona regie , careffour orhideea in max. 1 zi lucratoare
-
- Prin Posta Romana - Coletarie - 18 Lei in max. 3 zile lucratoare
In Romania:
-
- Prin Posta Romana - Coletarie - 18 Lei in max. 4 zile lucratoare
PLATA
- - La predare
- - Ramburs
Politica de retur
- - Produsul nu se poate returna.