Procesor sunet Helix DSP - AVLA-HP58209

Procesor sunet Helix DSP - AVLA-HP58209
Procesor sunet Helix DSP - AVLA-HP58209

Procesor sunet Helix DsP
HELIX DsP

Digital 8-channel signal processor with 56-bit signal processing

The first stand-alone DsP that deserves to be called a HELIX. The new HELIX DsP is more than convincing proof that noisy, distorting sound processors are fi nally a thing of the past. Excellent technical specs are combined with a feature package that could hardly be more impressive in actual practice. Intuitive operation thanks to a clearly structured graphical PC interface enables any ambitious sound freak to optimize the sound virtually any which way.

Windows interface - communication via UsB 2.0
MicrosD slot to upload DsP settings without having to connect the DsP to a PC
special audio DsP with a resolution of 56 bits - optimized for highest sound quality
Freely configurable inputs and outputs
Graphical 30-band EQ per channel with the fine adjustment of the individual bands in 1/24 octave steps and time correction in 7-mm steps, all established filter characteristics are available and much more
Inputs: 6 x RCA, 4 x high-level, 1 x optical, 1 x control input, MicrosD and UsB
Outputs: 8 x RCA and remote output
Extremely compact dimensions: 40 x 177 x 120 mm

Power save Mode
The Power save Mode is incorporated in the basic setup. It allows to significantly reduce the power consumption of the amplifiers that are connected to the HELIX DsP once theres no input signal present for more than 60 seconds. Please note that in many up-to-date cars with CAN or any other internal bus structures it may happen that the radio remains invisibly turned on for up to 45 min. even after leaving the car! Once the Power save Mode is active the Remote Output and therefore the connected amplifiers will be turned off. The HELIX DsP will reactivate the Remote Output within a second if a music signal is applied. It is possible to either modify the turn-off time of 60 sec. or completely deactivate the Power save made via the PC-tool software.


start-/stop capability
The switched power supply of the HELIX DsP assures a constant internal supply voltage even if the batterys voltage drops to 6 Volts during engine crank.


Automatic Digital signal Detection
switching from analog input to the digital input is done automatically as soon as an signal is detected on the optical input. This feature can be deactivated in the PC-tool software. Alternatively you can use the optional cable remote control URC 2A for manual switching between analog and digital inputs.
Inputs

6 x RCA
4 x High level speaker Input
1 x Optical sPDIF-Format (6-96 kHz samping Rate)
1 x Remote In
Input sensitivity

RCA/Cinch 4 Volts (internally adjustable) - default 4 Volts
Highlevel 5 - 9 Volts (intern. adjustable) - default 11 Volts
(corresponds to 6 - 30 Watts RMs - not max. power)
Outputs 8 x RCA
1 x Remote out
Output voltage max. 4 Volts RMs
Frequency response 10 Hz - 22.000 Hz
DsP resolution 56 Bit
DsP processing power 172 MHz
DsP type Audio signal processor
signal converter A/D: BurrBrown
D/A: BurrBrown

signal-to-noise ratio - digital input

signal-to-noise ratio - analog input


112 dB (A-weighted)

107 dB (A-weighted)

Total harmonic distortion (THD+N) - digital input

Total harmonic distortion (THD+N) - analog input


< 0,001 %

< 0,003 %

IM distortion (IMD) - digital input

IM distortion (IMD) - analog input


< 0,003 %

< 0,007 %

Crosstalk


> 90 dB @ 10 kHz
Operating Voltage 9,2 - 18 Volts, short drops down to 6 Volts acceptable
Current draw < 450 mA
Dimensions (H x W x D) 40 x 177 x 120 mm / 1,6 x 7 x 4,75

Producator:HelixCod:AVLA-HP58209