Programator profesional original Xhorse VVDI Prog , software v5.3.3

VVDI Prog Features:
1. Built-in update software: Make VVDIProg update timely.
2. High-speed USB communication interface: Make software automatically connect.
3. Smart operation mode: possible causes of error will be listed
4. Reserve ports: For future update.
5. Self-test function: Check if the machine works well or not.
6. Power supply: Through USB cable, software will automatically prompt if the external USB power supply is needed

Last version software is 5.3.3

VVDI Programmer Function:

v5.3.3 (2024-01-24)

* This version DON’t need update firmware
* Some ECU options process  optimization
* Land Rover RFA Adapter  options process optimization
* RH850 series Some options wiring diagram updated
* Modify LOCK_BCM2 options in <4-IMMOBILIZER>->:Erasing failure repair and prompt message modification
* Modify CAVALIER(2018) option in<7-AIRBAG>->: Wiring diagram update
* Modify LITHIUM BATTERY MODULE  option in <8-OTHER>->:Wiring diagram update

v5.3.2 (2023-12-11)
* This version DON’t need update firmware
* Optimization of ISN calculation for some ECU modules.
* VW MQB dashboard process optimization.
* BMW CAS4, Porsche BCM, Land Rover RFA options adapter detected illegal repair
* Modify ENGINE-341 option in <3-ECU>->: Optimize the process and Wiring diagram update.
* Modify PIC12F1822 option in <2-MCU>->:
Wiring diagram update.
* Modify XINGMA 315 option in <8-OTHER>->:
Optimize the process and Wiring diagram update.
* Modify QILIN VH option in <8-OTHER>->: Optimize the process and Wiring diagram update.
* Modify YingJie 500 315, ZhuHong 500 315 option in <8-OTHER>->: Optimize the process.

v5.3.1 (2023-08-30)
* This version DON't need update firmware
+ Add M68HC805P18(H44H), M68HC805P18(K05Y), MC68HC05P18(1F52W), MC68HC805P18(0G64R),
MC68HC805P18(G64R), XC68HC805P18(G04R) options in <2-MCU>-><motorola-mc68hc(8)05>
+ Add RENEGADE BCM(2017)(R7F701034), RENEGADE BCM(R7F701056) options in <4-IMMOBILIZER>->
+ Add Beetile(D70F3524)-READ(WELD), Beetile(D70F3524)-WRITE(WELD) options in <5-DASHBOARD>->
+ Add VIAGGIO SMARTBOX option in <8-OTHER>->
+ Add HA_MA S7 option in <8-OTHER>->

v5.3.0 (2023-08-30)
* This version DON't need update
firmware
* Modify GL8 BCM(2017-) WRITE,
option in
<4-IMMOBILIZER><BUICK>
Optimize the process
+Add FENGSHEN S30(93C46A)
option in
<8-OTHER><Dongfeng>

v5.2.9 (2023-08-30)
* This version DON't need update firmware
* Modify GL8 BCM(2017-)-WRITE, option in <4-IMMOBILIZER><BUICK>: Optimize the process
+Add FENGSHEN S30(93C46A) option in <8-OTHER><Dongfeng>

v5.2.9 (2023-07-04)
* This version DON’t need update firmware
* Modify GL8 BCM(2017–)-READ, GL8 BCM(2017–) WRITE, options in <5-DASHBOARD>
Optimize the process
* Modify HOWO A7,
HOWO SITRAK 2083,
HOWO T5,
HOWO T5H,
HOWO T7H,
HOWO TX,
Sino Trunk2083,
SITRAK 6011,
SITRAK 6021,
SITRAK C5H SQUARE REMOTE,
SITRAK C7H,
SITRAK C7H B5,
SITRAK RHOMBUS REMOTE,
SITRAK T7H
options in <8-OTHER>
Optimize the process + Add XINGMA 315 option in <8-OTHER>
+ Add QILIN VH option in <8-OTHER>
+ Add SITRAK C7H 540 option in <8-OTHER>

v5.2.8 (2023-05-31)
* This version DON’t need update firmware
* Modify MQB-LOCK(D70F35xx)-WRITE, VW-4th-NEC35XX-WRITE, options in <5-DASHBOARD>->: Optimize the process
+ Add GL8 BCM(2017–)-READ, GL8 BCM(2017–)-WRITE  options in  <4-IMMOBILIZER>->
+ Add  Rover 2017 BCM(MPC5746G), Rover 2017 BCM(MPC5748G) options in  <4-IMMOBILIZER>->
+ Add  SPECIAL CV(R5F2138A)(2018) option in  <5-DASHBOARD>->
+ Add  EXCELLE SRS(XC2336A-72)(2015) option in <7-AIRBAG>->
+ Add  BENZ W207 REAR MODULE option in  <8-OTHER>->
+ Add  ROVER-SHIFT-GEAR-MODULE, RANGE-ROVER-SEAT-MODULE2 options in <8-OTHER>->
+ Add  ROEWE-I6-ESL(SPC5602D)(2018) option in <8-OTHER>->
+ Add BLADE KEY(2018-2021), SMART KEY MOUDLE(2018-2021) options in <8-OTHER>->
+ Add Creta/Alcazar SMART KEY MOUDLE, I10/I20 SMART KEY MODULE options in  <8-OTHER>->

v5.2.7 (2023-04-19)
* This version DON't need update
firmware
+ Add MB91F53BC option in
<2-MCU>-><FYJITSU-MB9XF>
+ Add XC2361E-136 option in
<2-MCU>-><INFINEON-XC2XXXX>
+ Add SPC5602D option in
<2-MCU>-><ST-SPC560XXXX>
+ Add MQB-LOCK(D70F35xx)-READ,
MQB-LOCK(D70F35xx)-WRITE,
VW-4th-NEC35XX-READ,
VW-4th-NEC35XX-WRITE,
options in
<5-DASHBOARD>-><VOLKSWAGEN>

v5.2.1 (2022-10-30)
* This version DON’t need update firmware
* Modify M95080 option in 1-EEPROM&FLASH>->
* Modify CAMRY AC COMPUTER option in 8-OTHER>->
+ Add MB90F952 option in
2-MCU>->
+ Add D78F0441,
D78F0442, D78F0443, D78F0444, D78F0445, D78F0451, D78F0452, D78F0453, D78F0454, D78F0455, D78F0461, D78F0462, D78F0463, D78F0464, D78F0465, D78F0471, D78F0472, D78F0473, D78F0474, D78F0475, D78F0481, D78F0482, D78F0483, D78F0484, D78F0485, D78F0491, D78F0492, D78F0493, D78F0494, D78F0495
options in
2-MCU>->
+ Add 39106-26810(ST10F275)
option in 3-ECU>->
+ Add FORTHING T5
option in
5-DASHBOARD>->
+ Add ACCORD AIRBAG(SPC560P50L3)
option in 7-AIRBAG>->
+ Add ACCORD EPS(2022)
option in 8-OTHER>->
+ Add SONY1 BLUETOOTH
option in 8-OTHER>->

V5.1.7 VVDI ProgUpdate Info (2022-06-21)
* This version DON't need update
* Fixed some ECU options reading
exceptions
* Fixed bug about AT25320
option in
1-EEPROM&FLASH>->
+ Add M29F400FBXXMXX option in
1-EEPROM&FLASH>->
+ Add EDC17C08(ADAPTER),
EDC17C53(ADAPTER),
ME17.9.11(ADAPTER)
options in
10-BOSCH_ECU_ADAPTER>->
+ Add EDC17C55 option in
10-BOSCH_ECU_ADAPTER>->
+ Add EDC17C63(ADAPTER)
option in
10-BOSCH_ECU_ADAPTER>->

+ Add ME17.9.23(ADAPTER)
option in
10-BOSCH_ECU_ADAPTER>->

+ Add ME17.9.61(ADAPTER),
ME17.9.64(ADAPTER)
options in
10-BOSCH_ECU_ADAPTER>->


V5.1.6 VVDI ProgUpdate Info (2022-06-08)
* Fixed B48 and B58 options bug in
10-BOSCH_ECU_ADAPTER>->
+ Add CY15B016Q,
CY15B064Q,
CY15B128Q options in
1-EEPROM&FLASH>->
+ Add GT30L24M1W,
GT31L16M1Y80,
GT31L24M1W,
GT32L24F02,
GT32L24M01,
GT32L32M0 options in
1-EEPROM&FLASH>->
+ Add PCT25VF010A,
PCT25VF016B,
PCT25VF020B,
PCT25VF032B,
PCT25VF040B,
PCT25VF064C,
PCT25VF080B,
PCT25VF512A,
PCT26VF016,
PCT26VF032,
PCT26WF032 options in
1-EEPROM&FLASH>->
+ Add SST26VF016B,
SST26VF032B options in
1-EEPROM&FLASH>->
+ Add X5043,
X5045,
X5323,
X5325,
X84041,
X84161,
X84641 options in
1-EEPROM&FLASH>->

VVDI Prog Adapters Detailed Description

1. 16pin locking socket
Function: Read EEPROM chips
Use method: Follow the image direction when insert the DIP chip (PIN1 as yellow point show as the picture); SOP chip need soldering on 16Pin adapter first, then insert the chip follow the image direction.

2．MC9S12 Reflash Cable V1
Function: Read & Write MC9S08, MC9S12 series chips, current version is V1
Use method: Soldering the line on pin of chip before read & write

Notes:
(1) Please check all connection lines,ensure correct and reliable connection
(2) Please Don't lengthen CLK and GND-C line, maybe cause read data failed

3. MCU Reflash Cable V3
Function: Read & Write MC68HC(9)12, V850, H8X, R5C series chips, current version is V3
Use method: Soldering the line on pin of chip before read & write

Notes:
(1) Please check all connection lines,ensure correct and reliable connection
(2) Please Don't lengthen CLK and GND-C line, maybe cause read data failed

4. ECU Reflash Cable
Function: Read & Write engine ECU
Use method: Connect the ECU and R&W

Notes:
Please check all connection lines, ensure correct and reliable connection

1. VVDI PROG device + software
2. EEPROM socket
3. EEPROM adapter
4. MC9S12 Reflash Cable V1
5. MCU Reflash Cable V3
6. ECU Reflash Cable
7. USB Type-B Cable