RIFF 2 Box. JTAG box pentru partea de boot si alte operatiuni

After six successful years since the first RIFF Box hardware was released, we are introducing a new v.2 RIFF Box hardware. Developers did their best to develop a reliable, marvelous, yet functional device.

RIFF Box v.2 hardware is designed to accommodate a large variety of communication protocols.
RIFF Box v.2 – Hardware Specification:

    Dual-core Cortex-M4 MCU @ 204MHz
    PC to Box USB (Device) Speed: Hi-Speed (480 Mbps)
    Box to Device (Host) Speed: Full-Speed (48 Mbps)
    SD/MMC Interface with 1-Bit (DAT0) and 4-Bit (DAT0-DAT3) Bus Width support and SD_CLK up to 52 MHz
    UART Interface
    RIFF™ Smart Probing Feature
    Level-adjustable 23 GPIO Lines (1.65V to 3.6V) for interfacing a range of devices and protocols, such as NAND, SPI, I2C, Pin Finder, etc.
    4 fixed 3.3V GPIO Lines

RIFF Box v.2 - Interface Specifications:

    20-Pin Male Connector:
        JTAG Interface: TRST, TDI, TMS, TCK, RTCK, TDO and NRST
        SWD (Serial Wire Debug) Interface: SWCLK, SWDIO (SWDIO and SWCLK are overlaid on the TMS and TCK pins)
    30-Pin Male Connector:
        SD/MMC Interface 1/4Bit @ 52MHz
        Level-adjustable 23 GPIO Lines (1.65V to 3.6V)
    USB Device Connector: connects the Box with PC @ Hi-Speed (480 Mbps), approx. 20 MByte/sec
    USB Host Connector: connects the Box with USB devices @ Full-Speed (48 Mbps), approx. 1.5-2 MByte/sec
    RJ-45 Connector:
        6.1 RIFF™ Smart Probing Feature
        6.2 UART Port
        6.3 4 Fixed 3.3V GPIO Lines

RIFF Box v.2 - Supported SD/MMD Revisions:

Revisions 1.0 to 1.7 (for MMC: v4.0, v4.1, v4.2, v4.3, v4.41, v4.5, v4.51, v5.0) and higher
RIFF Box v.2 - Supported JTAG Cores:

    ARM7
    ARM920
    ARM926
    ARM946
    ARM7EJS
    ARM11
    CORTEX-A5
    CORTEX-A8
    CORTEX-A9
    CORTEX-A15
    OMAP3430
    OMAP3630
    OMAP4430
    TEGRA2 (CORTEX-A9)
    TEGRA2 (ARM7)
    QUALCOMM S3 (ARM7, ARM11, SCORPION)
    QUALCOMM S4 (ARM7, ARM11, SCORPION)
    NOVATHOR
    PXA270
    PXA312
    MIPS32™ IR5Bit
    MIPS32™ IR8Bit

RIFF Box v.2 - Software:

    RIFF JTAG Manager
    RIFF Remote helper
    RIFF Admin client / SN reader
    RIFF Box USB drivers

New software is fully compatible with Windows 10, which provides effortless installation. Just connect RIFF Box to Windows 10-based PC and everything will be installed automatically. For older Windows versions, there are custom drivers provided with RIFF JTAG Manager installer.

Continut pachet :
    Riff Box v.2 – 1 buc.
    Flat Cables – 3 buc.