scaner tester diagnoza auto autophix obd eobd can obdmate 121
-
Produs:Nou, Fără garanție
-
Numar articol:198499004
-
Disponibilitate:Indisponibil
-
Preț:123,00 Lei
-
Anuntul a expirat la:10.11.2020, 00:30
-
Ai o nelamurire?
-
Vandut de:
-
Vinde si tu:Pune in vanzare un produs ca acesta
-
Optiuni:
-
Nu ai gasit ce cautai?
Descriere
Vânzatorul este direct răspunzator pentru produsul afișat în această pagină.
Disponibilitate: Indisponibil - Vezi produse similare
Specificatii
Description of
OM121
OM121 is one small size universal OBD code reader, which used to
check engine system on all cars with OBDII standard. It provides
DIYers and car owners with a convenient tool for reading and
erasing fault codes fast. Compared with the other similar products
at home and abroad, humanization design buttons and interfaces
upgrade the comfort of operation, the price and function with
competitive advantage.
Coverage:
● Works on all after 1996 OBD II compliant US, European and Asian vehicles
● Supports ALL OBD II protocols: CAN, J1850 PWM, J1850 VPW, ISO9141 and KWP2000.
● Auto-scan all OBD protocols:
(CAN, J1850 PWM, J1850 VPW, ISO9141 and KWP2000.)
●With DTC definition , No need to lookup DTC Library
● Small and portable, easy to operate
●buttons with Humanization design
●Multilingual Menu: English, German,
French, Spanish, Portuguese and Russian
OM121 feature and functions
● Easily determines the cause of the “Check Engine Light ( MIL)”
● Reads hard(memory)/pending(intermittent) and historic codes and show definitions
● Turns off Check Engine Light (MIL), clears codes and resets monitors
● I/M monitor readiness test
● Retrieves vehicle information (VIN, CIN and CVN).
OM121 Support Car Makers
Europe
cars: Works on After 2000 and newer
OBDII/OBD2/OBD/CAN-BUS Vehicles
America & AU Cars: Works
on all 1996 and newer OBDII/OBD2/OBD/CAN-BUS vehicles
Asia Cars: Works on After
2005 and newer OBDII/OBD2/OBD/CAN-BUS Vehicles, Chinese
Cars after 2009
Specific Brand
America:fit for chrysler fit for ford fit for gm fit
for jeep fit for scion
Asia:fit for acura fit for asiagm fit for
daewoo fit for daihatsu fit for honda fit for
hyundai fit for nissan fit for perodua fit for proton
fit for subaru fit for suzuki fit
for
toyota
Australia:fit for ford fit for
dolden
China:fit for chery fit for geely fit for
gwm
Europe:fit for alfa romeo fit for audifit for
bentley fit for benz fit for bmw fit for
citroen fit for fiat fit for ford fit for jaguar fit for lancia fit
for land rover fit for
mini fit for opel fit for peugoet fit for porsche fit for renault
fit for saab fit for seat
fit for skoda fit for smart fit for vauxhall fit for volvo fit for
vw
Function list
NOTE: Even though it compatible with most cars, but different regions support the vehicle OBD2 protocol at different times, or some car is especially design, so it may not compatible with some cars which do not support OBD2 protocol. especially Japanese and Korea car
No equipment can guarantee 100% support for all cars
Start the engine before testing
FAQ Area before order:
1. Vehicle Linking Error?
A communication error occurs if
the scan tool fails to communicate with the vehicle’s ECU (Engine
Control Unit). You need to do the following to check up:
Verify that the ignition is ON.
Check if the scan tool’s connector is securely connected to the
vehicle’s DLC.
Verify that the vehicle is OBD2 compliant.
Turn the ignition off and wait for about 10 seconds. Turn the
ignition back to on and continue the testing.
Verify the control module is not defective.
2. Operating Error?
If the scan tool freezes, then
an exception occurs or the vehicle’s ECU (Engine Control Unit) is
too slow to respond to requests. You need to do the following to
reset the tool:
Reset the scan tool.
Turn the ignition off and wait for about 10 seconds. Turn the
ignition back to on and continue the testing.
3. Scan tool doesn’t power up?
If the scan tool won’t power up
or operates incorrectly in any other way, you need to do the
following to check up:
Check if the scan tool’s connector is securely connected to the
vehicle’s DLC;
Check if the DLC pins are bent or broken. Clean the DLC pins if
necessary.
Check vehicle battery to make sure it is still good with at least
8.0 volts.
4. LED lamps not working?
If you turn on the scan tool
and perform the I/M Readiness test but the LED lamps are not
working, there may be several possible causes, including bad
connection and ignition off. In this case, follow these steps to
check the scan tool.
Make sure the cable is connected to the DLC securely.
Verify the ignition key is in the KOER position.
Run the LED Test in the System Setup menu. If the scan tool did not
pass this test, there is a problem with the LED lamp. Please
contact us
5. Where's Our vehilcle OBD 2 Interface (Port) ?
6. What's Mean About OBD 16pin Port and OBD Fault Erro Code?
Modalitati de livrare si plata
LIVRARE
In Bucuresti
-
- Predare personala - regie in max. 2 zile lucratoare
PLATA
- - La predare
- - Ramburs
Politica de retur
- - Produsul nu se poate returna.