Switch Cisco 48-port Gigabit + 4-Port 10-Gigabit SG500x-48
Cost unic de transport la toate comenzile acestui vanzator
-
Produs:Nou, Ofer garanție, Cu factură
-
Numar articol:186623103
-
Disponibilitate:Indisponibil
-
Preț:9.894,13 Lei
-
Anuntul a expirat la:13.11.2017, 03:12
-
Ai o nelamurire?
-
Vandut de:
-
Vinde si tu:Pune in vanzare un produs ca acesta
-
Optiuni:
Descriere
Vânzatorul este direct răspunzator pentru produsul afișat în această pagină.
Disponibilitate: Indisponibil - Vezi produse similare
Specificatii
SG500X-48-K9-G5
Porturi: | 48 |
Standarde: | IEEE 802.3 10BASE-T Ethernet, IEEE
802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit
Ethernet, IEEE 802.3ad Link Aggregation Control Protocol, IEEE
802.3z Gigabit Ethernet IEEE 802.3af, IEEE 802.3at, RFC 768, RFC 783, RFC 791, RFC 792, RFC 793, RFC 813, RFC 879, RFC 896, RFC 826, RFC 854, RFC 855, RFC 856, RFC 858, RFC 894, RFC 919, RFC 922, RFC 920, RFC 950, RFC 951, RFC 1042, RFC 1071, RFC 1123 RFC 1213, RFC 1215, RFC 1286, RFC 1442, RFC 1451, RFC 1493, RFC 1573, RFC 1643, RFC 1757, RFC 1907, RFC 2011, RFC 2012, RFC 2013, RFC 2233, RFC 2618, RFC 2665, RFC 2666 IEEE 802.3x Flow Control, IEEE 802.3 ad LACP, IEEE 802.1D (STP, GARP and GVRP), IEEE 802.1Q/p VLAN, IEEE 802.1w Rapid STP, IEEE 802.1s Multiple STP, IEEE 802.1X Port Access Authentication RFC 1141, RFC 1155, RFC 1157, RFC 1350, RFC 1533, RFC 1541, RFC 1542, RFC 1624, RFC 1700, RFC 1867, RFC 2030, RFC 2616, RFC 2131, RFC 2132, RFC 3164, RFC 3411, RFC 3412, RFC 3413, RFC 3414, RFC 3415, RFC 2576, RFC 4330 RFC 2674, RFC 2737, RFC 2819, RFC 2863, RFC 1157, RFC 1493, RFC 1215, RFC 3416 |
Cu Management | Cu Management |
Buffer (MB): | Frames up to 10K in length. Packet Buffer :2*12M Flash 32 MB 800 MHz ARM CPU memory 256 MB |
Conectivitate: | Cabling type Unshielded twisted pair
(UTP) Category 5 or better; Fiber options (SMF and MMF); Coaxial
SFP+ for stacking purposes 48GE + 4 10GE |
PoE | Fara PoE |
LED Indicators | LED power savings, System, Link/Act, PoE, Speed |
Montabile in rack: | Nu |
Securitate: | DAI:The switch discards ARP packets
from a port if there is no static or dynamic IP/MAC bindings or if
there is a discrepancy between the source or destination address in
the ARP packet.This prevents man-in-the-middle attacks SSH : SSH is a secure replacement for Telnet traffic. SCP also uses SSH. SSH versions 1 and 2 are supported. Congestion avoidance A TCP congestion avoidance algorithm is required to minimize and prevent global TCP loss synchronization. Secure Sensitive Data (SSD) IEEE 802.1X (Authenticator role): RADIUS authentication and accounting, MD5 hash, guest VLAN, unauthenticated VLAN, single/multiple host mode and single/multiple sessions Supports time-based 802.1X Dynamic VLAN assignment ACLs : Support for up to 2000 rules on 500 Series and 3000 on 500X series. Time-based ACLs supported. Port security : Ability to lock MAC addresses to ports, and limit the number of learned MAC addresses. STP Root Guard:Prevents a port from being selected as a root port, effectively preventing bridges in the LAN segment connected to the port from being a root bridge. RADIUS accounting IP Source Guard (IPSG):This prevents IP Address Spoofing. DoS prevention : DoS attack prevention. Secure Core Technology (SCT):Ensures that the switch will receive and process management and protocol traffic no matter how much traffic is received. SSL : Secure Sockets Layer (SSL) encrypts all HTTPS traffic, allowing secure access to the browser-based management GUI in the switch. Multiple user privilege levels in CLI Levels 1, 7, and 15 privilege levels. Layer 2 isolation (PVE) with community VLAN*:Private VLAN Edge provides security and isolation between switch ports, which helps ensure that users cannot snoop on other users' traffic; supports multiple uplinks. STP BPDU Guard: A security mechanism to protect the networks from invalid configurations. A port enabled for Bridge Protocol Data Unit (BPDU) Guard is shut down if a BPDU message is received on that port. This avoids accidental topology loops. RADIUS/TACACS+ : Supports RADIUS and TACACS authentication. Switch functions as a client. DHCP snooping:Filters out DHCP messages with unregistered IP addresses and/or from unexpected or untrusted interfaces. This prevents rogue devices from behaving as a DHCP Server. Storm control :Broadcast, multicast, and unknown unicast. |
Management: | VLAN mirroring:Traffic from a VLAN
can be mirrored to a port for analysis with a network analyzer or
RMON probe. Up to 8 source VLANs can be mirrored to one destination
port. Other management:Traceroute; single IP management; HTTP/HTTPS; SSH; RADIUS; port mirroring; TFTP upgrade; DHCP client; BOOTP; Simple Network Time Protocol (SNTP); Xmodem upgrade; cable diagnostics; Ping; syslog; Telnet client(SSH secure support) Autoconfiguration with Secure Copy (SCP) file download :Enables secure mass deployment with protection of sensitive data. SNMP Smartports : Simplified configuration of QoS and security capabilities. IPv4 and IPv6 Dual Stack Secure Copy (SCP) :Securely transfer files to and from the switch. Textview CLI :Scriptable CLI. A full CLI as well as a menu CLI is supported. Cloud Services Support for Cisco Small Business and Cisco OnPlus. Port mirroring:Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to 8 source ports can be mirrored to one destination port. Time-based port operation :Link up or down based on user-defined schedule (when the port is administratively up). DHCP (Options 12, 66, 67, 82, 129, and 150):DHCP options facilitate tighter control from a central point (DHCP Server), to obtain IP address, auto configuration (with configuration file download), DHCP Relay, and host name. Web user interface Automatic time settings from Management Station. Text-editable configs :Config files can be edited with a text editor and downloaded to another switch, facilitating easier mass deployment. RMON Auto Smartports :Automatically applies the intelligence delivered through the Smartports roles to the port based on the devices discovered over Cisco Discovery Protocol or LLDP-MED. This facilitates zero touch deployments. Firmware upgrade: ? Web browser upgrade (HTTP/HTTPS) and TFTP and SCP ? Upgrade can be initiated through console port as well ? Dual images for resilient firmware upgrades Localization :Localization of GUI and documentation into multiple languages. Login banner :Configurable login banners for web as well as CLI. |
Viteza de transfer: | Switching capacity and forwarding rate : Capacity in mpps (64-byte packets) 130.95 / Switching Capacity (Gbps) 176 |
Caracteristici speciale: | Head-of-line (HOL) blocking. Queue assignment based on differentiated services code point (DSCP) and class of service (802.1p/CoS) Plug-and-play stacking configuration/management: Master/backup for resilient stack control Auto-numbering Hot swap of units in stack Ring and chain stacking options Auto stacking port speed Flexible stacking port options CIDR : Support for Classless Inter-Domain Routing IPv6: IPv6 Host Mode IPv6 over Ethernet Dual IPv6/IPv4 stack IPv6 Neighbor and Router Discovery (ND) IPv6 Stateless Address Autoconfiguration Path MTU Discovery Duplicate Address Detection (DAD) ICMPv6 Mixed stacking support :A stack can consist of a mix of SF500 and SG500 models (mix of 10/100 and Gigabit in the same stack). Layer 2 Switching: Spanning Tree Protocol: Standard 802.1d Spanning Tree Support Fast convergence using 802.1w ([RSTP]), enabled by default Multiple spanning tree instances using 802.1s (MSTP). 16 instances are supported VRRP (on 500X):VRRP delivers improved availability in a Layer 3 network by providing redundancy of the default gateway servicing hosts on the network. VRRP versions 2 and 3 are supported. Up to 255 virtual routers suported IPv6 QoS :Prioritize IPv6 packets in hardware IPv6 ACL :Drop or Rate Limit IPv6 packets in hardware MLD Snooping :Deliver IPv6 multicast packets only to the required receivers DHCP Relay at Layer 2 :Relay of DHCP traffic to DHCP server in a different VLAN. Works with DHCP Option 82. Quality of Service: Priority levels 4 hardware queues (8 future) User Datagram Protocol (UDP) Relay :Relay of broadcast information across Layer 3 domains for application discovery or relaying of BOOTP/DHCP packets. IPv6 RFC supported:RFC 2463,RFC 3513,RFC 4291,RFC 2460,RFC 2461,RFC 2462,RFC 1981,RFC 4007,RFC 3484,RFC 4214,RFC 4293,RFC 3595 IGMP querier :IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router. Class of service: Port based; 802.1p VLAN priority based; IPv4/v6 IP precedence/ToS/DSCP based; DiffServ; classification and re-marking ACLs, Trusted QoS High availability : Fast stack failover delivers minimal traffic loss. Layer 3 : IPv4 routing : Wirespeed routing of IPv4 packets Up to 128 static routes and up to 128 IP interfaces Rate limiting Ingress policer; egress shaping and ingress rate control; per VLAN, per port, and flow based High-speed stack interconnects :Cost-effective 5G copper and high-speed 10G Fiber and Copper interfaces. RIP v2 (on 500X) :Support for Routing Information Protocol version 2, for dynamic routing IPv6 over IPv4 network with ISATAP tunnel support USGv6 and IPv6 Gold Logo certified Hybrid stack (future) :A mix of SF500, SG500, and SG500X in the same stack (10/100, Gigabit, and 10 Gigabit). Port grouping/link aggregation: Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP): ? Up to 8 groups ? Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad LAG DHCP Relay at Layer 3 :Relay of DHCP traffic across IP domains. IPv6 applications :Web/SSL, Telnet Server/SSH, Ping, Traceroute, SNTP, TFTP, SNMP, RADIUS, Syslog, DNS client IGMP (versions 1, 2, and 3) snooping :Internet Group Management Protocol (IGMP) limits bandwidth-intensive multicast traffic to only the requesters; supports 1000 multicast groups (source-specific multicasting is also supported). Scheduling Strict Priority and weighted round-robin (WRR) Stacking : Hardware stack : Up to 200 ports managed as a single system with hardware failover. |
Greutate (Kg): | 4.01 kg |
Dimensiuni (W x D x H mm): | 440 x 44 x 257 mm |
VLANs: | Support for up to 4096 VLANs
simultaneously Dynamic VLAN assignment via Radius server along with 802.1x client authentication MAC- based VLAN Multicast TV VLAN :Continuously sends multicast streams in a multicast VLAN while isolating the streams from subscriber VLANs for bandwidth and security reasons. This feature is also known as Multicast VLAN Registration (MVR). PVE (Private VLAN Edge), also known as Protected Port, with multiple uplinks GVRP/GARP:Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP) enable automatic propagation and configuration of VLANs in a bridged domain. Unauthenticated VLAN CPE VLAN Port-based and 802.1Q tag-based VLANs Voice VLAN:Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS. Auto voice capabilities deliver network-wide zero touch deployment of voice endpoints and call control devices. Management VLAN Q-in-Q : VLANs transparently cross over a service provider network while isolating traffic among customers. Guest VLAN Protocol-based VLAN |
Modalitati de livrare si plata
LIVRARE
In Bucuresti
-
- Predare personala in max. 4 zile lucratoare
-
Taxa afisata este cea minima si include 5kg. La aceasta se vor adauga kg suplimentare daca este cazul sau km suplimentari daca este cazul.
PLATA
- - La predare
- - Ramburs
- - Online
Politica de retur
- - Produsul se poate returna in maxim 3 zile lucratoare
- - Metoda de retur: Ramburs contravaloare produs
- - Costul transportului va fi suportat de catre cumparator
- - Alte detalii: Retur acceptat in conditiile Garantiei de Livrare