Termostat DUBLU doua sonde cu ALARMA W1088 incubator uscator maternitate 220V

Afisare grade Celsius, iesire releu 2 canale, comutare intre modurile de racire si incalzire gama de masurare / control al temperaturii: -50 pana la 120 grC cu sonde NTC 10K etanse 1 metru lungime. Domeniu de masura si control al temperaturii: -50 ~ 120 grC Precizie masura: ± 0,1 grC Precizia control: ± 0,5 grC Tensiune de alimentare: AC 110-220V Iesire pe releu (Comutator de iesire) Memorarea datelor: Da Alarma la supra sau subtemperatura Intarziere pornire consumator Calibrare senzor Temperatura de lucru: 0 pana la 50 grC Temperatura de depozitare: -10 pana la 60grC Dimensiuni gabarit: 7,6 x 5,5 x 3,1 cm How to set the heating mode Setting essentials: start temperature stop temperature (the program automatically determines that the working mode is heating mode) How to set: 1. Long press. Up button, the startup temperature flashes, and the startup temperature value is set by the up and down buttons 2. Long press the adjustment button to stop the temperature flashing, and set the stop temperature value through the up and down buttons Use Cases: Control the water heater, stop heating to 65°C, and start heating again when the temperature drops to 50°C, how to set it? Step 1: Determine the working mode as heating mode, start temperature stop temperature Step 2: Press and hold the up button, the startup temperature will flash, and set the startup temperature to 50°C through the up and down buttons Step 3: Press and hold the adjustment button to stop the temperature flashing, set the stop temperature to 65°C through the up and down buttons, and the setting is complete!. Cooling mode setting method Setting essentials: start temperature > stop temperature (the program automatically determines that the working mode is the cooling mode) How to set: 1. Long press. Up button, the startup temperature flashes, and the startup temperature value is set by the up and down buttons 2. Long press the adjustment button to stop the temperature flashing, and set the stop temperature value through the up and down buttons Use Cases: Control the farm, stop the ventilation to 26°C, and start the cooling again when the temperature rises to 28°C. How to set it? Step 1: Make sure the working mode is cooling mode, start temperature > stop temperature Step 2: Press and hold the up button, the startup temperature will flash, and set the startup temperature to 28°C through the up and down buttons Step 3: Press and hold the adjustment button to stop the temperature flashing, set the stop temperature to 26°C through the up and down buttons, and the setting is complete!