Avem peste 6.000.000 de produse de la magazine si vanzatori profesionisti in Okazii.ro Marketplace
Cos cumparaturi
Favorite
Ai nevoie de ajutor ?
Catalog produse
Toate
 

Tester ESR Metru inductante, rezistente, capacitati, tranzistori, infrarosu,nou

* * 1 părere
5 din 5
Media calculata
pentru
1 calificativ
  • 5 stele fill 1
  • 4 stele fill 0
  • 3 stele fill 0
  • 2 stele fill 0
  • 1 stele fill 0
Livrare gratuita la comenzile de 500 lei

Descriere

Vânzatorul este direct răspunzator pentru produsul afișat în această pagină.

Disponibilitate: Indisponibil - Vezi produse similare

Specificatii

Vand Tester ESR Metru inductante, rezistente, capacitati, tranzistori, infrarosu,nou

Pret fix,nu fac schimburi

This is a cost-effective and widely used transistor detector. Can be used to detect NPN and PNP transistors, capacitors, resistors, diodes, triodes, N-channel and P-channel MOSFETs, thyristors, batteries, etc. Can also be used to detect infrared waveforms.
Features:
Can be widely used to detect NPN and PNP transistors, capacitors, resistors, diodes, transistors, N-channel and P-channel MOSFETs, IGBTs, JFETs, thyristors, batteries, etc.
. Zener diodes can also be detected and have a functional self-calibration.
After the detection is completed, point the infrared remote control at the "IR" light, and then press the button on the remote control. If the detector decodes successfully, the data code and infrared waveform will be displayed.
One-key operation, automatic detection and shutdown, you can also press the multi-function button to turn off the detector.
Place the pins of the components in the corresponding area, turn the small handle, the detector will automatically detect, and the final result will be clearly displayed on the backlit TFT screen.
Instead of the usual black and white display, this detector will display the results in color.
Specification:
Power Mode: Rechargeable Lithium Battery
Display: 3.5*3cm TFT screen
Diode Range: < 4.5V
Zener diode: transistor detection area: 0.01-4.5V Zener diode detection area: 0.01-20V
Triac Range: IGT < 6mA
Capacitance: 25pF- 100mF
Resistance: 0.01-50MΩ
Inductance: 0.01mH-20H
Battery: 0.1-4.5V (with battery)
Product chip: High-performance mcu
Instruction:
Transistor tester

Automatic detection of NPN and PNP bipolartransistors.N-channel and P-chmnnel MOSFETs,JFETs diodes(including double Diodes)N.and P-IGBTS, resisiors, Inductors, capacitors, thyristors,triac and battery (0 .1-4.50V) Automatie detection of zener diode (0.01-20v).  Self test with automatic calibration

IR decoder

Support Hitachi IR coding

IR waveform display

Other

Measurement results using TFT graphic display(160x128)

Auto Power Off(Timeout Settable)

Built-in rechargeable Li-ion Battery

Li-ion Battery voltage detection- 160x128 TFT display

Power on

In the power off state, short press the multifunction key, the tester is turnedon and automatically measured.

IR dcoder

After the component test is completed, point the infrared remote control at the "IR" test hole of the tester, press the remote control button, the tester will display the user code and data code after successful decoding, and display the corresponding infrared waveform.

If the decoding fails or the decoding fails, the user code and data code cannot be displayed. At this time, if you are in the tester interface, you cannot enter the infrared decoding interface. If you are in the infrared decoding interface, the last successful decoding information will still be displayed.

Detect Zener Diode

When the device is turned off or the test is completed, put the Zener diode into the Zener diode test area, press the locking handle, and briefly press the multi-function button.

Automatic calibration

Short-circuit three test sockets, short press the multi-function button, and the tester will automatically calibrate.

During the calibration process, there is no need to perform other operations except to disconnect the short wire according to the prompts.

Shutdown

Automatic shutdown after timeout

When the component test is completed or the infrared decoding is completed, and the automatic shutdown time is reached, the tester will automatically shut down (overtime 30 seconds)

Standby power consumption is 0 UA after shutdown.

Battery voltage measurement

Before each component measurement, the built-in lithium battery voltage will be detected and displayed. When the battery voltage is less than 3.1V, it will be forced to shut down. Please charge it at this time.

Package Included:
1* Multifunctional TFT Transistor Tester
1*Electronic components set
1*Cable
3*Test hook

Modalitati de livrare si plata

LIVRARE

In Bucuresti

  • - Predare personala - Calea Rahovei in max. 2 zile lucratoare

  • - Prin Posta Romana - Coletarie - 25 Lei in max. 4 zile lucratoare

In Romania:

  • - Prin Posta Romana - Coletarie - 25 Lei in max. 5 zile lucratoare

PLATA

  • - La predare
  • - Ramburs

Politica de retur

  • - Produsul nu se poate returna.

Tester ESR Metru inductante, rezistente, capacitati, tranzistori, infrarosu,nou - Parerile cumparatorilor despre vanzator si produs  

* *
5 din 5
Media calculata pentru
1 calificativ
  • 5 stele fill 1
  • 4 stele fill 0
  • 3 stele fill 0
  • 2 stele fill 0
  • 1 stele fill 0


Adauga review
De la Calificativ primit Data
mihneak (100% / 8)
* * 5 din 5

Nu ai gasit ce cautai?

Ar putea sa te intereseze

Cautari utile