Avem peste 6.000.000 de produse de la magazine si vanzatori profesionisti in Okazii.ro Marketplace
Cos cumparaturi
Favorite

Touchscreen cu display LCD sticla ecran Apple iPhone 6 negru original

  • Produs:
    Nou, Ofer garanție, Cu factură
  • Numar articol:
    184512974
  • Disponibilitate:
    Indisponibil
  • Preț:
    529,00 Lei
  • Anuntul a expirat la:
    12.05.2018, 18:11
  • Vinde si tu:
    Pune in vanzare un produs ca acesta
  • Optiuni:

Descriere

Vânzatorul este direct răspunzator pentru produsul afișat în această pagină.

Disponibilitate: Indisponibil - Vezi produse similare

Specificatii

Display cu touchscreen pentru iPhone 6

Acest touchscreen cu display functioneaza doar pe device-ul Apple iPhone 6 si nu este compatibil cu device-urile iPhone 6 Plus, iPhone 6s sau iPhone 6s plus.

Functia de Touch Id va functiona numai cu butonul original home. Aceasta componenta nu include butonul de home, va trebui demontat de pe piesa

 

Componenta Display - Touchscreen

Culoare: negru

Numar culori: 16.7 milioane

Dimensiune ecran: 4.7 inch

Rezolutie: 750 x 1334 px

Altele: Multitouch, Ion-strengthened glass, oleophobic coating

Informatii, detalii, montare si demontare service autorizat pentru Display cu Touchscreen iPhone 6:


Pasul 1

Image 1/1: Remove the two 3.6 mm Pentalobe screws next to the Lightning connector.

Pasul 2

Image 1/1: If the plastic depth gauge is attached at the center of the iSclack, remove it now—it's not needed for larger phones like the iPhone 6.

Pasul 3

Image 1/2: The iSclack is designed to safely open your iPhone just enough to separate the pieces, but not enough to damage the display cables.

Pasul 4

Image 1/1: Press a suction cup onto the screen, just above the home button.

Pasul 5

 

Image 1/1: Take your time and apply firm, constant force. The display assembly is a much tighter fit than most devices.
Pasul 6
Image 1/3: Several clips along the top edge of the front panel form a partial hinge.
Pasul 7
Image 1/3: In a pinch, an unopened canned beverage works well for this.
Pasul 8
Image 1/1: One 2.2 mm screw
Pasul 9
Image 1/1:
Pasul 10
Image 1/1: Take care to only pry up on the battery connector, and not the socket on the logic board. If you pry up on the logic board socket, you may break the connector entirely.
Pasul 11
Image 1/1: Three 1.2 mm screws
Pasul 12
Image 1/1:
Pasul 13
Image 1/2: Use the flat end of a spudger to disconnect the front-facing camera and sensor cable connector.
Pasul 14
Image 1/2:
Pasul 15
Image 1/2: When reassembling your phone, the display data cable may pop off its connector. This can result in white lines or a blank screen when powering your phone back on. If that happens, simply reconnect the cable and power cycle your phone. The best way to power cycle your phone is to [guide|29363|disconnect and reconnect the battery connector|stepid=69537].
Pasul 16
Image 1/2: When reconnecting the digitizer cable, '''do not press the center of the connector'''. Press one end of the connector, then press the opposite end. Pressing in the center of the connector can bend the component and cause digitizer damage.
Pasul 17
Image 1/1:
Pasul 18
Image 1/1:
Pasul 19
Image 1/2:
Pasul 20
Image 1/2:
Pasul 21
Image 1/2: Do not push the home button all the way through—you only need to get a corner free so that you can pry it free with a spudger.
Pasul 22
Image 1/2:
Pasul 23
Image 1/2:
Pasul 24
Image 1/1: If you are replacing a broken front panel, there may be glass shards stuck to the home button. Carefully remove any remaining glass before transferring your home button to a new display.

Modalitati de livrare si plata

LIVRARE

  • Livrare prin Fan Courier 16 lei doar in localitatile de acoperire. Livrare prin Posta Romana 12 lei in toata tara.

PLATA

  • - Ramburs

Politica de retur

  • - Produsul nu se poate returna.
Fii primul care scrie un review

Spune-ti parerea acordand o nota produsului

Adauga review