Avem peste 6.000.000 de produse de la magazine si vanzatori profesionisti in Okazii.ro Marketplace
Cos cumparaturi
Favorite
Ai nevoie de ajutor ?
Catalog produse
Toate
 
Numar articol: 198579064. Vezi produse asemanatoare.
Pune in vanzare un produs ca acesta

VAG COM VCDS 22.10 HEX-V2 HQ ATMEGA, ROMANA + ENGLEZA A++

* * 1 părere
1 din 5
Media calculata
pentru
1 calificativ
  • 5 stele fill 0
  • 4 stele fill 0
  • 3 stele fill 0
  • 2 stele fill 0
  • 1 stele fill 1
Cost unic de transport la toate comenzile acestui vanzator
Disponibilitate:
In stoc 2 disponibile
Livrare:
  Curier rapid - 24,00 Lei Detalii
Estimat livrare:
Joi, 25 Apr.
Cantitate:
Pret:
200,00 Lei
Produs:
Nou, Certificat de garanție 6 luni
Politica de retur:
Acest produs poate fi returnat in 14 zile Detalii
Plata:
  • La predare
  • Ramburs
  • Avans

Descriere

Raporteaza produs

Vânzatorul este direct răspunzator pentru produsul afișat în această pagină.

Specificatii

Nota: Ultima versiune de soft disponibila este v22.10 ROMANA + ENGLEZA
Interfata diagnoza tester VCDS/VAG.COM 21.9 ROMANA / ENGLEZA
Chip Edition: ATMEGA162 + FT232RQ + 9241 + 16V8B +ATA6561

ATMEGA Hex-v2 is the new generation of vagcom vcds obd2 diagnostic interface for vag vehicles. VCDS Hex-v2 USB Interface VAG 21.9 support 5M baud rate communication, it is ensure the integrity and efficiency of data transmission..  Atmega162 HEX V2 VCDS 21.9 full active cable For VW Audi Seat Skoda,it is BUG fixes and improvements support Windows 10 system.

ATMEGA Hex-v2 VCDS 21.9 Features:


Language: Multilanguage
Software Version: VCDS 21.9
Firmware Version: 1.96
Supported Vehicle List: For AUDI VW SEAT SKODA
Chip Edition: ATMEGA162 + FT232RQ + 9241 + 16V8B +ATA6561
System requirement: Windows XP, Vista, 7, 8 and 10(32-bit and 64-bit)


Functions & Features:
 
1. Fully compatible with almost of VW, Audi, Seat and Skod models through the current
model year, including models using a direct CAN connection for diagnostics.
2. Can use the new 7-Digit PIN/SKC codes to match new keys in almost immobilizer
equipped VW/Audi/Seat/Skod models.
3. Can access almost control modules which require proprietary VAG modes running
the KWP-2000 protocols (2001+ Teves Mk.60 ABS, numerous 2002+ modules), KWP6000
(CAN) and/or KWP7000 (UDS).
4. Completely revised and expanded ROD (ODX) Data. Including coverage for almost
the latest models of cars such as the new 4G-chassis Audi A6. The structure of
our ROD data has also been revised to eliminate much redundancy and keep the
installer size reasonable.
5. Support for new UDS addresses required for compatibility with new systems
found in latest car models.Auto-Scans now show sub-system label file names.
6. EDC15-16 Mileage reading now includes support for some EDC15 V6 TDI ECUs.
7. Revised and expanded Label Files More than 350 new or revised files since the
last dataset.
 

HEX V2 Vagcom 21.9 New Features:


Auto Scan 1001.01
1. Control module unit information
2. Read fault codes 004.01
3. Output test 005
   Selective output test 005
4. Basic settings 006
5. Clear DTCs 004.10
6. Close control module 022
7. Pairs of coding control module (brush hidden) 007 (service 1A)
   008 (Service 22) From the station control module 007 coding (service 1A)
   008 (Service 22) Read measured value block 08 010.02 (KWP1281)
8. Advanced measurement reading
9. channel read 010.01
10. matching 012 014 (long)
11. Log (Known under KWP-2000 * Coding II) 015.01
12. View readiness 020.01 Guided ready state settings
13. security access 015.02
14. All supported DTCs
15. Common OBD-II function
16. Fault environmental data
17. Dual K-Line Support 7-PIN code 020.07
18. Upgrade to the latest fault code library
19. Direct CAN line diagnosis (Need to support diagnostic cables CAN line diagnosis)
20. Modes of transport 1001.03 (on)
    1001.04 (off) (Need to support diagnostic cables CAN line diagnosis)
21. Advanced measurement block
22. Support for dual engine control module


Compared to the previous version, the VAG 21.9 main changes is BUG fixes and improvements.

Atmega162 Hex v2 Vag 21.9 Basic functions


00 Auto Scan
01 control module unit information
02 read fault codes
03 Output Test
       Selective output test (only for KWP-2000 *)
04 Basic settings
05 clear DTCs
06 Close Control Module
07 pairs of coding control module
       Slave control module for coding (only for KWP-2000 *)
Read measured value block 08
09-channel read (applies only to KWP-1281 *)
10 matching
11 Log (known under KWP-2000 * Coding II)
15 View Ready
16 security access (only for KWP-2000 *)
18 All supported fault codes (only for KWP-2000 *)
33 Common OBD-II function


VAG/VCDS HEX-V2 21.9 Packing List:


1 x HEX-V2 VAG 21.9 diagnostic cable
1 x CD with VCDS 21.9 software

Modalitati de livrare si plata

LIVRARE

In Cluj-Napoca

  • - Predare personala in max. 1 zi lucratoare

  • - Prin Curier rapid - 24 Lei in max. 2 zile lucratoare

In Romania:

  • - Prin Curier rapid - 24 Lei in max. 2 zile lucratoare

PLATA

  • - La predare
  • - Ramburs
  • - Avans

Politica de retur

  • - Produsul se poate returna in maxim 14 zile lucratoare
  • - Metoda de retur: Ramburs contravaloare produs
  • - Costul transportului va fi suportat de catre cumparator
  • - Alte detalii: Retur acceptat in conditiile Garantiei de Livrare
Optiunea ta
VAG COM VCDS 22.10 HEX-V2 HQ ATMEGA, ROMANA + ENGLEZA A++
CUMPARA
Pret curent:
20000 Lei
Comanda minima:
1 bucata
Cantitatea:

VAG COM VCDS 22.10 HEX-V2 HQ ATMEGA, ROMANA + ENGLEZA A++ - Parerile cumparatorilor despre vanzator si produs  

* *
1 din 5
Media calculata pentru
1 calificativ
  • 5 stele fill 0
  • 4 stele fill 0
  • 3 stele fill 0
  • 2 stele fill 0
  • 1 stele fill 1


Adauga review
De la Calificativ primit Data
cosmin3698 (100% / 29)
* * 1 din 5

După 2 utilizari a început să dea erori că nu interfata nu este autorizata .

Nu ai gasit ce cautai?

Ar putea sa te intereseze

Cautari utile

Top branduri in Interfata diagnoza