Cap control dedurizator SIATA

De vanzare 2 capete control noi, nefolosite.

Primul este un model ceva mai vechi, al doilea este modelul care il inlocuieste.

Pretul este pe bucata si este acelasi pentru ambele modele

SIATA V132

PN: STE0/05 

O scurta descriere in Engleza:

Standard Electronic Controller is a controller dedicated to the production of water treatment systems working on the principle of ionic exchange of resins, allowing for the production of softening systems. The control of the various phases of regeneration is carried out using SIATA valves The regeneration cycle may be selected from a table of pre-defined cycles. It is started at the programmed time on the days selected, or can be started manually. The manual start regeneration key, when pressed during a stop phase, allows the residual time of the phase to be cancelled and the next phase to be proceeded to.

SIATA SFE

PN: SFE-BK0/05

O scurta descriere in Engleza:

Can be used on different valves for softening or filter applications: V132, V230, V240, V250, V260, V360, V350/V351 and V363 •Easy and simple, user-friendly programming •LCD display backlighted during programming mode • Indication of day of the week and time of the day in hours and minutes • Time of day alternating with volume remaining during service • Regeneration steps and cycle time remaining • Quick and easy setup of capacity, regeneration time, and day override • Advanced programming options including up to 4 regenerations phases with independently adjustable cycle times • Manual regeneration, meter immediate or delayed, time clock, day of week regeneration • High frequency regeneration (every 1/2/3/4/6/8 or 12 hours) • Programming is stored in the EEPROM and will not be lost due to power outages • Interchangeable standard lithium battery (#CR2032) • Statistic Modes • Chlorine cell driver or external solenoid valve driver option • Electrical rating : 230V /50Hz or 60Hz transformer 12 VAC (6VAC if Chlorine cell) • Operating temperature range : 2°C to 43°C