Lexia 3
Descriptions
1. Lexia3 full chip interface latest version
works for Citroen for Peugeot Diagnostic.
2. Update: By Link.
3. Support Multi-Language: English, German,
French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish,
Dutch, Polish, Italian, Hungary, Greek, Czech
4. It works for Coitroen/for
Peugeot.
5. Versions: Lexia 3 V48, PP2000
V25, Diagbox V7.83, Firmware 921815C
6. Diagbox Software Update
Password:
Diagbox
V7.XX to V7.76: Scary01
Diagbox
V7.76 to V7.82: Maitresox01
Diagbox
V7.82 to V7.83: Very Simple!
please note: it only can work
withWin 7
32bitsystem!
Lexia 3 Full Chip
Features
1. It is fit for most Peugeot cars from
1995.
2. Diagnostics is performed via OBD-II connector
(which is located near steering wheel) or via manufacturer-specific
connector (only older cars, pre-2001).
3. Supports Multi Languages:
PP2000 Software supported language: English,
Chinese, German, French, Japanese, Russian, Arabia, Spanish,
Turkish, Danish, Iranian, Greek, Israel, Hungary, Indonesian,
Italian, Dutch, Norwegian, Polish, Portuguese, Finnish, Slovenian,
Swedish, Czech, Croatia, Thai.
Lexia3 Software supported language: English,
German, French, Japanese, Russian, Spanish, Portuguese, Swedish,
Turkish, Dutch, Polish, Italian, Hungary, Greek,
Czech.
4. Lexia3 diagnostic scanner is a comprehensive
cars diagnostic tool. You can do all as a authorized dealer does
PP2000, lexia 3 diagnostic software allows you perform complete
diagnostics of all from 1995 untill present models via OBD-II
connector (which is located near steering wheel) or via
manufacturer-specific connector (only older cars,
pre-2001)
5. Unlike other universal car scanner tools
which only read fault codes, this software performs nearly ALL the
functions like the original dealer diagnostic tool. Our diagnostic
interface containsK-Line multiplexor, CAN-BUS interfaces and SAE
J1850 bus (both PWM and VPW).
Support
cars
1. For Coitroen :
CZero/ C1/ C2/ C3/ C3 PICASSO/DS3/ CELYSEE/ C4/
C4 CACTUS/ C4 PICASSO/ DS4/ DS 5LS/ C5/ DS5 /C6 / C8/ CCROSSER/ C4
AIRCROSS/ NEMO/ BERLINGO/ JUMPY/ JUMPER/ AX/ SAXO/ BX/ ZX/ XSARA/
XANTIA/ XM/ EVASION/ C15/ FUKANGFUKANG 988/ ELYSEE/ C-ELYSEE(R3)/
C-TRIOMPHE/ C-QUATRE
2. For Peugeot:
iON/ 107/ 108 /206 207/ 207+/ 280/ 301/ HOGGAR/
307/ 308/ RCZ/ 407/ 408/ 508/ 607/ 807/ 1007/ 2008/ 3008/ 4007/
4008/ 5008/ BIPPER/ PARTNER/ EXPERT/ 106/ 205/ 306/ 309/ 405/ 406/
605/ 806
Lexia 3 Full Chip
Functions
This software performs nearly ALL the functions
like the original dealer diagnostic tool, Unlike other universal
car scanner tools which only read fault codes, Our diagnostic
interface contains K-Line multiplexor, CAN-BUS interfaces and SAE
J1850 bus (both PWM and VPW).
1. Read identification
Displays complete identification of control
unit, e.g. part number, software/hardware version, manufacturer,
etc...
2. Read fault codes
Displays all stored and pending fault codes with
complete description (e.g. "Rail pressure - too low
pressure").
Program supports report printing or copy to
clipboard.
3. Clear fault codes
This function clears all stored fault codes and
other diagnostic information.
4. Auto-scan (complete car
scan/test)
Detects all ECUs (electronic control units)
installed in car and reads all diagnostic fault
codes.
5. Measured Values
Program displays live Data like Engine Speed,
Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values
can be displayed in graph, 9 values at once, or full listing (all
measured values). Logging to file is also supported, which allows
offline analysis.
6. Actuator test
Actuator test activates particular actuator
(e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut
off fuel, etc..)
7. Programming
functions/Adaptation
This feature is of great importance in all
vehicles because systems like Engine control units, Immobilizers,
Airbags, Alarms, Body Control Units, and some others, require you
to perform reset or programming procedures after car repair is
done, or even configuration after replacing broken Control
Unit.
Hardware and Software
Requirements
1. Software requires at least Intel
Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and
USB 1.1 port (USB 2.0 recommended) and Windows XP OR Windows 7
32Bits ONLY with the latest service pack installed. If customer
requires, we can prepare ready to work PC.
2. Better to close the Anti-virus software on
your computer. Because the Antivirus may recognize it as a type of
virus, it will clear off all the software on the
CD.
3. The CD contains a upgrade pack which is
latest version V7.76, so please DO NOT upgrade it online by
yourself.
Packing
List
1 x Main unit with extension OBD2
cable
1 x Long 9pin to USB cable
1 x Short 9pin to USB cable
1 x 16pin to Clip Cable
1 x Instruction for Installation and Activation
DVD for PP2000