Godiag GT105 Breakout Box + GT107 adapt. DSG DQ250 DQ200 VL381 VL300 DQ500 DL501
- La predare
- Ramburs
- Avans
Descriere
Raporteaza produsVânzatorul este direct răspunzator pentru produsul afișat în această pagină.
Specificatii
Godiag GT105 Breakout Box Plus GT107 DSG Gearbox Data
Read/Write Adapter
Function:
Read/write DSG gearbox data with pcmtuner module 58/kess v2/ktm
bench etc
Compatible devices:
Kess v2, pcmflash,
pcmtuner,
ktmbench
Module 58
VAG DSG/CVT
DQ200MQB/G2 (0CW)
DQ250MQB (0D9)
Reading, writing, checksum correction
VL381/DL382 (0AW/0CK)
DL501/G2 (0B5)
DQ200 (0AM)
DQ250E/F (02E)
VL300/V30 (01J/0AN)
Writing, checksum correction
DQ200/MQB/G2 Boot (EEPROM)
DQ250E/F/MQB Boot (EEPROM)
DL501/G2 Boot (EEPROM)
VL381 Boot (EEPROM)
DL382 Boot (EEPROM)
Honda UDCT Boot (Continental TC1782/EEPROM)
Reading, writing
DQ200/MQB/G2 Boot (MICRO)
DQ250E/F/MQB Boot (MICRO)
VL381 Boot (MICRO)
DL501/G2 Boot (MICRO)
DQ500 (0BH/0BT)
VL300/V30 BSL (FLASH)
VL300/V30 BSL (EEPROM)
DQ250C (02E)
DL382 Boot (MICRO)
Honda UDCT Boot (Continental TC1782/MICRO)
Reading, writing, checksum correction.
Package includes:
1 set Godiag GT105 breakout box
1 set Godiag GT107 DSG gearbox adapter
PCMTuner DSG Pinout
PCMTuner, GT105 and GT107 gearbox clone wiring
diagram
Easy Operation:
1. Connect Godiag GT107 to the gearbox ECU DQ250, DQ200, VL381,
VL300, DQ500, DL501.
2. Connect Godiag ECU IMMO Prog AD and connect 12V 2A DC power
supply.
3. The GODIAG GT107 analog ignition switch is in “Auto” mode if it
is not pressed, and it is in “Manual” mode if it is pressed
down(Note: Please select the corresponding mode in the software for
data reading)
4. Connect PCMFlash, PCMTuner J2534passthru.
5. Connect the computer to open the software and select “Auto”.
Used on the Car:
Easy Operation:
1. Connect Godiag GT107 to the gearbox ECU DQ250, DQ200, VL381,
VL300, DQ500, DL501.
2. Connect the Godiag ECU IMMO Prog AD and connect the vehicle
battery.
3. The Godiag GT107 analog ignition switch is in “Auto” mode if it
is not pressed, and it is in “Manual” mode if it is pressed
down(Note: Please select the corresponding mode in the software for
data reading).
4. Connect PCMFlash, PCMTuner J2534passthru.
5. Connect the computer to open the software and select “Auto”.
Kess V2, GT105 and GT107 gearbox clone wiring
diagram
Easy Operation:
1. Connect Godiag GT107 to gearbox ECU DQ250, DQ200, DQ500.
2. Connect Godiag ECU IMMO Prog AD and connect vehicle battery or
12v 3A power supply.
3. Connect kessv2 device, and press down the GT107’s switch to make
it in “Manual” ignition mode.
4. Connect the computer to open the software.
Galerie foto
Modalitati de livrare si plata
LIVRARE
In Cluj-Napoca
-
- Predare personala in max. 1 zi lucratoare
-
- Prin Curier rapid - 24 Lei in max. 2 zile lucratoare
In Romania:
-
- Prin Curier rapid - 24 Lei in max. 2 zile lucratoare
PLATA
- - La predare
- - Ramburs
- - Avans
Politica de retur
- - Produsul se poate returna in maxim 14 zile lucratoare
- - Metoda de retur: Ramburs contravaloare produs
- - Costul transportului va fi suportat de catre cumparator
- - Alte detalii: Retur acceptat in conditiile Garantiei de Livrare