Modul RFID Phillips RC522 13.56Mhz (SPI) Arduino (r.121)

Produsul este nou!

Produsul este la fel cu cel prezentat in fotografii!

Specificații în limba engleză:

MF RC522 is applied to the 13.56 MHz non-contact card chip, communication of high integration, speaking, reading and writing is the NXP company in view of the "three tables" application of a low voltage, low cost, small volume, non-contact card chip, in reading and writing is the intelligent instrument and a portable handheld device research and development a good choice. MF RC522 takes advantage of advanced concept of modulation and demodulation, fully integrates all types of passive under 13.56 MHz contactless communication mode and protocol. Support 14443 a compatible transponder signal. Digital part processing ISO14443A frame and error detection. In addition, it supports rapid CRYPTO1 encryption algorithms, expressions validation, MIFARE series products. 

MFRC522 support MIFARE contactless communication series more high-speed, bidirectional data transfer rate is as high as 424 kbit/s. As the 13.56 MHz card series chips, high integration, speaking, reading and writing the new members of the family, MF RC522 with MF RC500 and MF RC530 has many similarities, it also has many characteristics and differences. It with the communication between the host USES the SPI mode, is beneficial to reduce the attachment, could reduce the size of our PCB, reduce the cost.

Feature:

MF RC522 is applied to the 13.56 MHz non-contact card chip, communication of high integration, speaking, reading and writing is the NXP

• Working current: 13-26 ma/dc 3.3 V
• The idle current: 10-13 ma/dc 3.3 V
• Sleep current: < 80 ua
• Peak current: < 30 ma
• Operating frequency: 13.56 MHz
• Support for card type: mifare1 S50, mifare1 S70, mifare UltraLight, mifare Pro, mifare Desfire
• Product physical properties: size: 40 mm x 60 mm
• Working environment temperature: 20-80 - c
• Storage environment temperature: 40-85 - c
• Environmental relative humidity: 5% - 5% relative humidity
• SPI module interface parameters
• Data transfer rate: the largest 10 mbit/s

Pachetul conține:
• 1 bucată x RFID-RC522 module ( cod produs: r.121)
• 1 bucată x The Standard S50 Blank Card
• 1 bucată x S50 Special-shaped Card(as shown by the key ring shape)
• 1 bucată x Straight Row of Pin
• 1 bucată x Curved Row of Pin

Predare personală în Galați.

Se expediază în toată țara prin Poștă sau curierat în sistem ramburs.

• DPD - 15,5 lei
• FAN COURIER - 15,5 lei
• Urgent Cargus - 15,5 lei
• Poșta Romană (Prioripost) - 15,5 lei

Trimit în tară și cu verificare colet. La prețul transportului se adaugă 4 lei.

Dacă aveți nelămuriri sau întrebări vă rog nu ezitați să sunați sau să-mi scrieți.