OBDSTAR P50 Resetare airbag, 86 brands si 11600+ ECU Part No. by OBD/ BENCH
- La predare
- Ramburs
- Avans
-
Ramburs cu Garantia de Livrare
Curierul special îți livrează produsul pe care tu îl achiți la primire. Dacă produsul nu este ca în descriere, îți recuperezi banii, inclusiv taxele de transport.


Descriere
Raporteaza produsVânzatorul este direct răspunzator pentru produsul afișat în această pagină.
Specificatii
Product Description
OBDSTAR P50 is based on RK3128 quad-core processor, extremely fast and smooth; equipped with 5-inch capacitive touch sensitive screen.
OBDSTAR P50 Functions:
1. Supports one-click airbag reset for 86 brands and Over 11600+ ECU part No.
2. supports fuzzy search for ECU part No.
3. contains clear BENCH mode wiring diagram
4. Contains powerful and complete description files for fault code
5. Buy Mileage & Oil Light/ Service Reset Authorization, get the same function as the odo master.
6. Supports English language. Distributor code: 0086A002.
7. One year free update. No token. Update cost is 150USD/year. (90 USD for another year of update if you renew it before expires)
8. Supports Hyundai/Kia TC2xxx types bench airbag reset with CAN FD adapter
9. Newly add Battery Reset for Audi/Volvo by BENCH
10. Support Tesla bench airbag reset
11. supports SAS reset function
Read ECU Information: Read ECU part number, historical frame number, current frame number, collision record.
Read DTC
Erase DTC
Read EEPROM: Read EEPROM data from ECU for backup
Write EEPROM: Write EEPROM data into ECU
Read FLASH
Write FLASH
Write VIN: Write back the correct VIN after executing [Crash Data Clear]
Clear/Erase Crash: Clear ECU crash data
Unlock ECU
Battery Reset for Audi and Volvo by BENCH
P004 Highlights:
P004 adapter is designed for ECU programming, reading or writing data in bench mode. It has merits below:
1. Programming devices keep in normal communication no matter turn on or off 12V power button;
2. Turn on or off 120Ω resistance at any time for CANBUS ECU;
3. Support 6&14 and 3&11 CANBUS Protocol at the same time;
4. Optional CANFD adaptor (Mainly used for models after 2020, such as HYUNDAI/KIA, etc.);
5. Support GM Single CAN(GM SCAN);
6. Support K-line Protocol;
7. P004 jumper can connect with multiple wires at the same time, make wiring clearer and easier;
8. DB15 connector can communicate with any OBDII-16 I/O interface.
How to use OBDSTAR P50?
Please register the device before using.
Distributor code: 0086A002.
The general operation steps are as follows:
1. Read the part number---To see whether it reads the correct part number
2. Read fault codes---Check if there is an airbag crash fault
3. Clear the fault code---A few car models' airbag fault codes can be cleared by cleaning the fault codes directly
4. If reading EEPROM is supported, please read EEPROM
5. Clear the collision record
6. If there is a write VIN function, please write VIN ( Very few Ford and Renault models' VIN information will be erased when cleaning the fault codes)
7. Clear the fault code
8. Read the fault code---To confirm that the fault has been successfully cleared

Vehicle Coverage:
ACURA, ALFAROMEO, ASTONMARTIN, AUDI, BAOJUN, BENZ, BMW, BUICK, CADILLAC, CHERY, CHEVROLET, CHRYSLER, CITROEN, DACIA, DODGE, FERRARI, FIAT, FORD, GMC, GREATWALL, HONDA, HYUNDAI, INFINITI, JAGUAR, JEEP, KIA, LADA, LAMBORGINI, LANCIA, LANDROVER, LEXUS, LINCOLN, MASERATI, MAZDA, MINI, MITSUBISHI, NISSAN, OPEL, PEUGEOT, PORSCHE, RENAULT, SEAT, SKODA, SMART, SUBARU, SUZUKI, TESLA, TOYOTA, UAZ, VOLVO, VW
2. Cover over 11600 ECU part No. (supporting fuzzy search)
3. Support MCU types: H8SX, RH850, SPC, XC2XXX, TC2XXX, TMS570...
Operation system | Android 5.1.1 |
CPU | RK3128 quad-core ARM cortex A7 |
Battery | 2600mA, rechargeable polymer lithium battery |
Extension memory card | 32G micro SD (TF) card supported |
Storage capacity | 16GB |
LCD | 5.0 inch |
LCD resolution | 800*480 |
Touch screen | Capacitive touch screen |
Wifi | Supported |
Working temperature | -20℃ ~ 55℃(14℉ ~ 131℉) |
Storage temperature | -20℃ ~ 70℃(-4℉ ~ 158℉) |
Weight | About 700g |
Dimension | 198mm*115*mm*31mm |
Modalitati de livrare si plata
LIVRARE
In Cluj-Napoca
-
- Predare personala in max. 1 zi lucratoare
-
- Prin curier cu Garantia de Livrare - 18 Lei in max. 2 zile lucratoare
In Romania:
-
- Prin curier cu Garantia de Livrare - 18 Lei in max. 2 zile lucratoare
- Ridicare de la locker Miercuri, 27 Aug. - 13,09 Lei
PLATA
- - La predare
- - Ramburs
- - Avans
- - Ramburs cu Garantia de Livrare
Curierul special îți livrează produsul pe care tu îl achiți la primire. Dacă produsul nu este ca în descriere, îți recuperezi banii, inclusiv taxele de transport.
Politica de retur
- - Produsul se poate returna in maxim 3 zile lucratoare
- - Metoda de retur: Ramburs contravaloare produs
- - Costul transportului va fi suportat de catre cumparator
- - Alte detalii: Retur acceptat in conditiile Garantiei de Livrare
Spune-ti parerea acordand o nota produsului