Regulator controler panouri solare cu afisaj LCD 2 porturi usb 30A 12V/24V

Pretul este pentru MODEL 30A!

This controller is a intelligent, multi-purpose solar charge and discharge controller. Fixed LCD display with a very friendly interface is used in this product; various control parameters can be flexibly set, fully meet your various application requirements. 

There are optional 10A 20A 30A model 

10A:

if your battery is 12V ,the max solar panel input is 25V  120W

if your battery is 24V ,the max solar panel input is 50V  240W

20A:

if your battery is 12V, the max solar panel input is 25V   240W

if your battery is 24V, the max solar panel input is 50V   480W

30A

if your battery is 12V ,the max solar panel input is 25V   360W

1.Build-in industrial micro controller.

2.Big LCD display,all adjustable parameter.

3.Fully 4-stage PWM charge management.

4.Build-in short-circuit protection,open-circuit protection,reverse protection,over-load protection.

Parameter:

MODEL PWM 10A PWM 20A PWM 30A PWM 40A PWM 50A PWM 60A Battery Voltage 12V 24V Auto Charging Current 10A 20A 30A 40A 50A 60A Discharging Current 10A 10A 10A 20A 30A 30A Max Solar input 50V(for 24V battery) 25V(for 12V battery) Equalization 14.4V(Sealed) 14.2V(Gel) 14.6V(Flood) Float charge 13.7V(defaul,adjustable) Discharge stop 10.7V(defaul,adjustable) Discharge reconnect 12.6V(defaul,adjustable) Charge reconnect 13V Voltage of open light     Solar Panel 8V(Light lights delay) Voltage of close light Solar Panel 8V(Light off delay) USB output 5V/3A Self-consume <10mA Operating temperature -35°C~+60°C Size 133.5*70*35mm 188*90*47mm *all red color voltage X2 ,while using 24V system.

Connection:

1.Connect the battery to the charge regulator - plus and minus.

2.Connect the photovoltaic module to the regulator - plus and minus.

3. Connect the consumer to the charge regulator - plus and minus.

The reverse order applies when deinstalling!

An improper sequence order can damage the controller!