Senzori parcare Sensor Kit Car Auto LED Display 8 Sensors 22MM

Predarea se face doar la stadionul olimpia cel de rugby din vitan de L - V intre orele 9.30 - 20

Car Radar Detector LED Display Car Parking Sensor Kits with 8 Sensors 22mm Hole Reverse Assistance Backup Radar Monitor System

Product parameters:
Rated operating voltage: 12 (DC)
Normal operating voltage range: 9V-16V (DC)
Rated working current: 50 ~ 100MA (associated with alarm status)
PVC sensitivity: PVC (∮ 75) ≥ 1.0m
Distance error: ± 0.05m
Host working environment temperature: -40 ~ 85 ℃
Display working environment temperature: -20 ~ 70 ℃
Storage ambient temperature: -40 ~ 85 ℃

Performance requirements:
1,Working temperature
The reversing radar is designed to work normally when the host working temperature range is -40 ~ 85 ℃ and the display working temperature range is -20 ~ 70 ℃.
2, Working voltage
Normal operating voltage range of the reversing radar is 9V-16V (DC)
3, Power-on test
The reversing radar can work properly after the power is repeatedly on and off  (1 second interval).
(The screen will maintain the power-off effect last time if the monitor is power on in 3 seconds, and the screen will automatically refresh after a “DI”sound, otherwise,the screen will display the same effect with the first time if the monitor is power on after 3 seconds)
4, Display and alarm
The reversing radar will not appear irregular flash and false alarm
5, aftershocks size
The aftershocks size is less than 1.6ms if the host of the reversing radar works in the low temperature of -30 ℃. Aftershock size is less than 1.3ms at room temperature
6, Protection function
If you inversely connect the electrodes under 9 ~ 16 (DC) input voltage, and this state is kept continuously, which will not damage the radar
7, Probe works
The reversing radar is designed for front and rear reversing, and two probes in front (E.H) and probes in rear(ABCD) will work at the same time, and the front brake (EFGH) will work when moving forward

Installation tips:
1, Hold the outer edge of the probe to install, and it is prohibited to squeeze the sensor in the middle of probe;
2, Please refer to the manual or the link shown in the picture;
3, if the product and the car paint color differences, you can spray the product on their own
Safety warning:
The reversing radar must work under the specified voltage range(DC 9 ~ 16V), if not, it can not work normally, the system may not work below the specified voltage, and the electronic parts may be damaged above the specified voltage.