Tester universal baterii acumulatori auto 7-30V AUTOOL BT660 imprimanta termica
- La predare
- Ramburs
- Avans
Descriere
Raporteaza produsVânzatorul este direct răspunzator pentru produsul afișat în această pagină.
Specificatii
Product Description
AUTOOL BT-660 Car Battery Tester with Built-in Printer BT660
Battery Analyzer
Language: English, French, German, Spanish,
Italian, Polish
Printer: with Built-in printer
Battery System Tester AUTOOL BT660 adopts currently the world's
most advanced conductance testing technology to easily,
quickly and accurately measure the actual cold cranking amps
capability of the vehicle starting battery,
healthy state of the battery itself, and common fault of the
vehicle starting system and charging system,
which can help maintenance personnel to find the problem quickly
and accurately, thus to achieve quick vehicle repair.
AUTOOL BT660 Specification:
1. Lifetime maintenance, and free upgrade for 3 years
2. Application: 12V automotive cranking lead acid battery and
12v/24v car system test
3. Measure Range:
CCA | 100-3000 |
BCI | 100-3000 |
CA | 100-3000 |
MCA | 100-3000 |
JIS | 26A17--245H52 |
DIN | 100-2500 |
IEC | 100-2500 |
EN | 100-2500 |
SAE | 100-3000 |
GB | 30AH-220AH |
4.
Working Environment Temp: -10 C -50 C
5. Special test clip: Double conductance Kelvin clamp
6. Housing Material : Acid-resistant ABS plastic
7. Measure Range: 30AH-200AH
8. Voltage Measure Range: 7-30VDC
Battery Type:
Main Function for BT660:
1. Battery Test
Select the battery test and press OK key to continue
Battery Type: select your battery type, usually is “Regular
Flooded”
Input testing standard: the standard which you can see the
front of the battery ,such as CCA、BCI、DIN. If you can’t find
any info about the standard, you can choose GB standard.
Choose GB standards would lead little tolerance.
Input rated capacity: you can see the starting current
standards in front of the battery
Then press OK key to start testing.
2. Cranking Test
Starting the engine as prompted, tester will automatically
complete the cranking test and display the result.
Normally, cranking voltage value lower than 9.6V is regarded as
abnormal and it is OK if it is higher than 9.6V.
Test result of the tester includes actual cranking voltage and
actual cranking time.
When cranking test is abnormal, battery test result will also be
displayed at the same time.
3. Charging Test
When enter the charging test, tester will prompt "Loaded
testing"
Note: Do not shut down the engine during the test. All
electrical appliance and device are in OFF state. Turn on/off
any
electrical appliance in the vehicle during the test will affect the
accuracy of the test result.
Operate accordingly to increase the engine rotating speed to
2500turns, and keep for 5 seconds.
Tester starts the charging volt test after increase rev
detected.
After the test finished, tester displays the effective
charging volts, ripple test result and charging test result.
4. Review Data
After entering the forth function, then press OK key you can
view the final test result.
5.Print Data
You can print out the test result with built-in printer.
6. Export Data
Connect this battery tester to computer, you can download the print
software from our web at .
7. Additional Function:
1). Language
2). Time adjustment
Package List:
1pc x AUTOOL BT-660 Car Battery Tester
Modalitati de livrare si plata
LIVRARE
In Cluj-Napoca
-
- Predare personala in max. 4 zile lucratoare
-
- Prin Curier rapid - 24 Lei in max. 5 zile lucratoare
In Romania:
-
- Prin Curier rapid - 24 Lei in max. 5 zile lucratoare
PLATA
- - La predare
- - Ramburs
- - Avans
Politica de retur
- - Produsul se poate returna in maxim 14 zile lucratoare
- - Metoda de retur: Ramburs contravaloare produs
- - Costul transportului va fi suportat de catre cumparator
- - Alte detalii: Retur acceptat in conditiile Garantiei de Livrare